tory burch eddie Method of connecting the TV with

[amoy2698]

2, in the pop-up - Advanced














II, ATI graphics card settings
If you find your graphics card settings interface with our differences, please update the driver download the driver.
1, click of the mouse right click on the desktop, select









4, press the order graph set label, and finally click












3, respectively, select the 4:3
Step Five: Play Video
present, most of the players in the smallest of the state can ensure that the television screen to normal play, but a few appear to minimize playback software, the TV screen will freeze. This phenomenon appears to the player you can shrink the window, then drag it around the corner.
STORM is recommended here (Kmplayer) player, even if you minimize it, but still a full screen television, set the method as shown below:








If you only have one card, then you play the music on the computer or playing games the sound will be transmitted on television, the solution is simple, plus a 30 yuan PCI sound card, and then the TV cable to the audio sound card, computer speakers plug received onboard sound card. Storm video to play movies using the View / Options / Output / DirectShow audio, select your PCI sound card to output, so the film will spread the voice of television up to, and not to a computer speaker inside.
then open the Control Panel, Sounds and Audio Devices Properties / click on the So to be truly complete without disturbing each other, to achieve perfection.










FAQ
1. I Graphics are 4 holes, 7 holes or 9 holes of the S terminal
A: 4-pin, on 4 holes, 7 holes of the S terminal hole apply. Can be directly inserted in the 4-hole, 7 hole cards on the S terminal, 9 holes of the S terminals also need an adapter cable to use.
2. a sub-second audio frequency line what use
A: Many sound cards have only one voice output hole, through which a sub-second audio frequency line,tory burch eddie, can become two output jacks so that the computer speakers and computer plug the audio cable access TV special audio plug can plug in the sound card on the.
3. I do not have the TV S-Video Interface how to do
A: S terminal switch to AV adapter, this adapter is to solve the S terminal on the TV there is no problem, the adapter purchased separately about 10 yuan, and the computer supporting the purchase of TV cable connection, only 6 million.
4. I did not set the graphics properties option in the instructions how to do
A: This behavior occurs because you have not installed the latest graphics driver, please download the appropriate graphics driver.
5. cable is properly connected, but the TV does not have picture and sound
A: Please confirm the video card settings are correct, while the TV channel is already transferred to the AV1 or AV2,jordan 9, AV3 terminals or S-video mode
6. Why does the TV display image is black and white or very poor resolution
A: Please upgrade your graphics card driver, reset the card. it may be caused by the television system, first the TV mechanism type choose , why the TV screen will be displayed on the cell
A: At present, some players are able to ensure the minimum of the TV screen under normal play, but there will be a small number of player minimized, the screen displayed on the TV fixed. such as: QQlive online player software, so there is a normal phenomenon in this moment,
8. how to separate the sound, such as: video sound only in TV, the voice of the other programs on the computer speakers
A: If you only have one card,christian louboutin on line 联合国称首批逃离利比亚, then you play the music on the computer or playing games the sound will be transmitted on television, the solution is simple, 30 yuan plus a PCI sound card, and then the TV cable to the audio sound card, computer speakers plug received onboard sound card. Storm video to play movies using the View / Options / Output / DirectShow audio, select your PCI sound card to output, so the film will spread the voice of television up to, and not to a computer speaker inside.
then open the Control Panel, Sounds and Audio Devices Properties / click on the So to be truly complete without disturbing each other, to achieve perfection.
9. the TV display image is too light or too dark how do
A: Yes, the graphics output to a TV set in the image on the saturation,Nike Air Max 90, brightness and contrast set
10. screen how do constantly flashing jitter
A: The flashing TV screen is mostly due to the refresh rate or format does not match the cause. can be adjusted by 3 methods:
(1). be reduced graphics refresh rate, look at the issue is resolved.
(2). You can also change the TV standard. in graphics in the TV format from the setting adjustment screen output, we can only choose either a single or a TV monitor. just replace the video card. The current video card supports dual monitor output and more.



thought about how we use computers connected TV? hey, with Connecting the TV to the computer can not buy the disc matter, but the screen is also very clear it is not what you would like to try ah? the benefits of a computer connected TV as follows:
1. TV, computer video playback, while without affecting the use of computers.
2. screen to DVD-level high-definition, big screen TV to enjoy. get 30 seconds to install simple!!
3. you can comfortably lie on the couch watching videos. Online infinite number of new sources,air jordan spizike, but also save costs to buy the disc!! for the whole family to watch videos. or my wife to see drama, you do continue to chat online. play games,Air Jordan 14 韩俄申明称将第三次配合发射 罗老 号运, why not!
4. downloaded HD movie / TV, no front display, lying in bed watching TV, comfortable, at the same time, the computer can access, play games.
saw these benefits is not a little heart it?,asics for women 缓缓! Here's to teach you how to use the computer to connect the TV!!
first purchase of computers connect to a TV special audio and video cable, length specifications are: 1.8 m, 5 m , 10 meters, 15 meters and 20 meters, etc.,
first step: connecting hardware
1, S-video cable connection
the S terminal wire end into the graphics card port on the S terminal, at the same time the S terminal wire the other end into the TV port on the back of the S terminal, the connection is completed (Figure 1); if your TV does not S terminal port, you can use the shop to provide the S and S terminal female terminal cable connected, and then head into the other end of the AV after the TV video input port on the AV, the connection is completed (Figure 2).
2, the audio cable connection
two audio RCA cable into the TV, respectively, after the left and right channel audio input port, while the 3.5mm audio cable to plug into the sound card's audio audio output, connect completed.
If you need to use 3.5mm female port, the connection is completed.





Figure 1





Figure 2
Step two: Turn on the TV
hardware connected, must first turn on the TV, start the computer in the next step will be to find the TV that after the computer hardware.
third step: Start the computer
If you are connected to a TV after the computer starts, you must first turn on the TV and tune the TV to AV1 or AV2, AV3 terminals or S-video mode (the TV display the name of the machine may be different), then restart the computer, let the computer find the TV this hardware, or video card settings in the next step in setting options may not be found.
Step four: Set the graphics card one, NVIDIA graphics settings
If you find yourself with our video card set of different interface, please update the driver. download the driver.
1, open the computer, desktop, right mouse button in the pop-up menu,mbt rocker bottom shoes, select










3, click the the order shown by label set, and finally click Apply.













2, select the >