Learning and knowledge Photoshop favor the student

Photo Name: Photoshop,


Photo name: bring up photos soft blue and yellow - a simple usage,
1, open the original material, press Ctrl + J to the background Copy a layer of layers, point channel panel, select the blue channel, image> apply image, layer as the background, mixed to Multiply, opacity 50%, RP tick,
2, Back to the Layers panel, create a curves adjustment layer, and blue channels: 44,182, red channel: 89,108
3, create a new layer, fill it with black, layer blending mode to Multiply and Opacity to 60%, select the middle part of the constituency Elliptical Marquee Tool, press Ctrl + Alt + D Feather, a value of 70, and then double-click the Delete key to delete, again on the text, complete the final results.


Photo name: bring up photos beautiful red and yellow,
1, open the original material, Ctrl + J to copy the background layer a layer, press Ctrl + Shift + U to color, Enforcement: Filter> Fuzzy> Gaussian Blur, number 4, for the color filter layer blending modes, layer opacity to 27%.
2, create a new layer, press Ctrl + Alt + Shift + E stamp layers, layer blending mode to color. 3, create a gradient map adjustment layer, lilac - orange, Alt + Ctrl + G with clipping mask.
4, create the sunlight / contrast adjustment layer, -5, -21
5, create a Smart Sharpen adjustment layer, set to the default amount, digit 46, radius 0.8, Gaussian blur,
6 , create a Levels adjustment layer, 8,1.00,255
7, the color adjustment layer to create one optional, Red: +17, -8, +16,0, yellow: -54,0, +10, + 18, white: -5,0,0,0,


Photo Name: publicity to create beautiful ice blue tones,
1, making plans along of the diagram: Image - Adjustments - Auto Levels, Auto Contrast, Auto Color adjustment,
2, open the original image,Lacoste Arin Patent Trainers, copy the background layer,
3, New Hue and Saturation adjustment layer, red: -80, yellow: -80 Blue: +32
4, color balance: -20, +20, +50
5, curve adjustment, value: 38,36
6, hue saturation, blue: -45
7, optional colors, blue: -10, +20, +24,0, blue: +20,0, +10,0, neutral colors: (black) +5, black: (black) +5
8, load the blue channel selection, do curve adjustment, value: 74,119
9, brightness, contrast: 0, +10
10, back all the layers, (Ctrl + Shift + Alt + E), to alleviate the picture a simple processing such as dermabrasion,
11, to start copying the background copy layer top, mixed mode to Soft Light and Opacity 25%
12, once all the maneuvers stamped layer, marked with light effects, filter - render - lighting effects, opacity 50%, other values ​​to default. Add a mask to rub back overexposed,
13, brush on your favorite brush, add text, complete


Photo Name: elaborate water on a female,
1, open the original material, the first hook with the pen tool to figure out, press Ctrl + Enter the path into selection, press Ctrl + J to copy characters to the new layer.
2, press Ctrl + M characters on the cutout adjustment curve, numerical: 47,60
3, create a new layer, fill color: # 0A6A60
4, the figures on the skin to the head of this half to pull out, copy to new layer.
5, the foreground color is set to bright green (the color of the water needs to be set according to the necessitated mapping), the background set to white, select the menu: Image> adjustments> gradient map. Adjust the images are monochrome chiaroscuro.
6, Filter> Artistic Effects> plastic packaging, file adjusted according to individual needs to be done, the main effect of the extraction of water part of the high light, so the mapping is made of water one can dream the face of high light adjust the density and degree of evacuation, according to the characteristics of the water, people can receive the information the eye is the only high-light the darkest part of the other part is transparent.
7, select the layer 3 copy, press Ctrl + Alt + Shift + ~ tune out the high-light selection, press Ctrl + Alt + Shift mouse click on the layer 3 copy, so the people outside the constituency to lose, and then the new map Layer 4 fill white.
8, Ctrl + click on the layer 4 turn into a selection, press Ctrl + Shift + I invert the selection, press Delete to delete, clean, delete a few more points.
9, the layer 4 into constituencies, select the copy of layer 3, point mask button (which can be adjusted to hide the dark layer). Then brush the figure on the accessory high light wipe, 3 copies of the same layer have built mask, wipe off the excess high light.
10, layer 3 is set to Drops material to ascertain online.
11, it is best to find the water black background material, if it is white or other colors of the water background material, can reduce or reverse the saturation of the background to black, set the color filter layer properties will Black masked, leaving only the white transparency of the water, while the collage to penetrate the direction of the water to find a suitable location collage up, to take avail of the mask to the interface between water, people place the root handle.
12, the background color of the final deal.


Photo Name: making panic movies,
broken cup brush: Broken Glass brush
blood brushes: Blood smudge brush.
1, press CTRL + U to adjust the Hue / saturation, color tick, value: 220,26, -9
2, alteration the color of eyes, with the lasso tool to select the eyes. Then adapt the hue / saturation, color tick, value: 117,47,7
3, with a dark tone 13px -15 px brush draw around the eyes, set in black, mode to Multiply, opacity 25 %, flow rate 25%, draw around the eyes, the same method to modify the lips.
4, create a new layer, fill color # 31425e,
5, broken glass brush painting.
6, add a layer style, projection, Multiply, opacity 75%, angle 120 °,
7, CTRL + E Merge layers, with the lasso tool to select the broken area, change the opacity to 80 % Duplicate the layer, adjust the mode to Multiply,
8, Filter - Render - Lighting Effects, points of light, intensity 53, focus 69,
9, the final brush and then draw some blood blood


Photo Name: Photoshop Creative Synthesis poster printer,
1, open the backdrop and the printer material, pluck out the printer, duplicate came in the appropriate location gracefully.
2, open the leopard material, adjust the delay came in the appropriate size and angle, with the pen tool to pull out of the leopard to the new layer.
3, tick the printer periodical with the pen tool the contour path into selection and press Ctrl + Shift + I invert the selection, press Delete to cancel,
4, the paper layer to the stroke, and then work Gamon Edition In addition to the excess part,
5, in a new layer above the layer of paper, paint brush with black leopard right front foot of the shadow of the shadow of the printer and paper, deserving to lower transparency,
6, more need to add the terminal advertisements and text to complete the terminal results.


Photo name: bring up nostalgic landscape photos,
1, open the incipient copy layer
2, curve adjustment, numerical RGB: 109,99
3, hue saturation, value: 0, -39,0
4, color balance, value: 0,0, -34
5, optional colors, neutral colors: 0,0, -20,0
6, a new layer, fill d7b26c, layer mode overlay, opacity 56%,
7, the clouds pull material into the diagram, into the original top, soft layer model, the adding to the Sky erase out some outside, sealed layer (Ctrl + Alt + Shift + E)
8, optional color, black: 0,0, -14, -5
9, a new layer, fill 0d1d50 , layer mode exclusion, copy a layer, filling 52%
10, curve adjustment, numerical RGB: 128,155
11, color balance, value: +24, +7, -64, filling 70%
12, Levels, value: 29,1.00,227, filling 58%
13, optional colors, neutral colors: +16, +12, -11, +5
14, stamped map layer (Ctrl + Alt + Shift + E), color balance, value: +24, +7, -64, filling 38%
15, back layer (Ctrl + Alt + Shift + E), opacity 46 %, filling 48%,
16, Ctrl + E Merge Visible, sharpening photos look


Name: the real picture convey plaster statues,Lacoste Swerve Lace Trainers,
1, the background copy of a layer with the pen tool to pull out the first part of the eye, Ctrl + Enter, the path to transform into a constituency, with a straw, draw around the white of the eye color, eyes ambition be filled,
2, a new layer, in the copy layer using the Pen tool to describe the contours of the person out of the route and rotate electoral boundaries, along Ctrl + C, Ctrl + V to paste the new layer
3, select the Clone Stamp tool, the edge of the forehead hair is slightly for modification, after the achievement of a copy of the layer, and turned into a Smart Object layer.
4, Filter - Stylize - Emboss, angle 135 °, altitude 3, number 142, Filter - Noise - the middle value, the radius of 2. Change the layer blending mode to overlay】 【.
5, add a black and white adjustment layer, and load the first line of the path described by Ctrl + Shift + I reverse and fill the black, so that part of the screen, only to become a black and white portrait images.
6, select the Clone Stamp tool, the rim of the eye and ear a little modification.
7, with the pen tool, hair and eyebrows were selected together, then cut to the color layer on layer. Ctrl + C, Ctrl + V, to replicate a close eye and additional layers.
8, cut to the channel panel, copy the red channel, Filter - Blur - surface blur, radius 2, threshold 33%, hold down the Ctrl key is completed, the red color edition thumbnail point opposition it.
9, back to the Layers panel, set the foreground white, new layer, Alt + Del keys, the white filled the entire selection.
10, cut to just the copy of the hair, eyebrows and layers, the first effect of the relief, then into black and white. Data refer to the value ahead the eyes, eyebrows and hair contrast with the magnificent change, with the main bit out of tune, add a layer mask, to cover up an unexpected place.
11, to load the path described by the previous line, press Ctrl + Shift + I, reverse selection, draw around the color, the use of suction tools, puny modification of the original hair.
12, As some of the details of the parts, using brush and imitation stamp tool, the modified back and along and you're done friends!


Photo Name: youth people handle with the delicate skin out,
1. Duplicate the background layer. Filter - Blur - Gaussian blur radius to 10.
2. set the layer blending mode to Double-click the layer label to open the right mixture of adoptions. In the Advanced Mixed, delete perfected R and G channels,
3. Use of the color equilibrium of the picture bend, according to the picture to decide
4. Create a new layer, select the repair Brush (J), select layer sample. Freckles or blemishes on the large, sham removed.
5.ctrl + shift + alt + E, stamp all layers, tick the skin part, you can choose their own way, I rather the pen tool, but you can also use the Polygonal Lasso tool, to Note that to deal with the skin, so to remove the eyes, eyebrows, lips, noses. Anti-selection (ctrl + shift + i) delete the addition to the skin, excess parts.
6. Filter - Blur - Gaussian Blur with a radius of 20. Set layer opacity to 75%
7.CTRL + J, duplicate the layer 3 filter - Other - High Pass radius of 4, mixed mode to


Photo Name: tune out the brilliant color photos,
1. Open the original image, Ctrl + U, Hue and Saturation, Hue -79, Saturation -22, Lightness +17, br> 2.Ctrl + M, tone curve, the red channel, slightly raised up a number,
3. Create a new layer, set the foreground color: # F9DA06, background color set to black, Filter> Render> clouds, Ctrl + Alt + F to enhance see, layer blending mode to Shift + Alt + E back layers, filter> aesthetic effect> drawing painting, brush size 6, Sharpness 0, brush type is simple, add a layer mask, and some of the human some of the retinue ground black brush wiping out
5. Create a new layer fill color: # ADF871, layer blending mode to fresh tune.
6. Create a new layer, Ctrl + Shift + Alt + E back layer, Ctrl + Shift + U to color, layer blending mode to
7. Create a new layer, Ctrl + Alt + ~ tune out the high-light selection,Lacoste Swerve Trainers, fill color: # FBF4C4, layer blending mode to . Create a new layer, Ctrl + Shift + Alt + E back layer appropriate look at the details of the modification, the final sharpening photos look


name: a easy access the age tune,
1. Open the original image, hue saturation: saturation -55
2. to be the red channel curve approximation, mathematical and amplitude based on pictures, act the color contrast of green channel, blue channel reverse comparison, br> 3. hue saturation: saturation -35
4. Duplicate Layer, Filter - Other - High Pass, I use the value is 250, mixed mode to Multiply,
5. do a Gradient Map adjustment layer, black - white,
6. Filter - Blur - Gaussian Blur, radius of 4, can increase the image of secret, given mushroom to people,
7. the picture on the uncoordinated -100 blue saturation, brightness -100,


Photo Name: black and white retro color,
1. Open image, duplicate the layer, using the lasso tool (more polished and clean ) hook out of the skin, (channels can also be), copy the hook out of the skin,
2. Image - Adjustment - optional colors, neutral colors: -49, -5, +100,0
3. tick on the part of the copy, image - adjustment - optional colors, neutral colors: +35, -37, +64, +22
4. hook pants, copy, image - adjustment - optional colors, neutral color: -29, -48, -31,0. Ctrl + L pants in levels of light, color scales: 0,0.81,175
5, tick hair, reproduce, absence no be very clean, a tiny edge background color, can make cilia even more integration, tick the background,
6. color, image - adjustment - optional colors, independent colors: -30, -47, +100,0.
7. election in the background layer, (no hair, no skin, no pants that layer), according to Q to enter rapid mask,Lacoste Shua Lace Trainers, select the gradient tool, black to transparent gradient from top left to bottom right corner pull, that the range of black obtaining selected, Q to exit Quick Mask can, Levels: 0,0.32,255
8. using the same method to tune out the left side of the light source, reception Ctrl + A, Ctrl + Shift + C, Ctrl + V, all layer are copied to a layer, into the top, superimposed, the color more vivid,
9. the details section (whites of the eyes, eyes, lips, slippers, nail) color, add in the final map lighting effects feel the motorcar drove up,


Photo Name: prestigious film poster making,
1. Open the original image, duplicate the layer,
2. new blank layer, fill it with dark, put to the background copy of the emulating,
3. adjust the copy of the coating, select the Lasso tool to figure out a large bust wheel, emergence 30, Ctrl + Shift + I Invert Selection, Delete remove,
4. create a new layer . Blending mode to So in the heavily black and white picture, the color of the elaboration is very beautiful.
5.Ctrl + L tone good order, the image compression down a morsel, 116,1,255
6. Create a new layer, add text, add a paragraph of text each rather create a new layer, so that comparison of the layout amenable,


Photo Name: Large, intention is only to make the stone a class
3. the right to adjust the blue channel copy to the inside layer, and to add the color you want, I used the deep orange
4. the base map Copy the red channel layer, with a mask to remove the sky and stone, leaving only the lawn, and to add color with the Gradient Map
5. Open the material lightning pellet, copy the contrast of the red channel to have the largest file
6. Select the layer blend mode to Overlay and adjust the location and size, making it a light source, remove some unnecessary asset (to decide), then use the radial blur filter to knob it radiation, granted the formation of eruption beam
7. to copy the base map of the red channel inside the channel, enhancing the compare, so that the grass part of the high-light revealed more affirmed, and then select the layer of high optical part of the paste inside, with white fill, layer mode to Overlay, then part of the mask to remove the sky with white, leaving only part of the grass so the grass there is shine light in the light prescience
8. Select the mask layer 1 and then invert the selection, selection by the sky, addition curves and Hue / Saturation adjustment layer to adjust according to personal predilection and the purity of the color you like
9. Finally, some posters add elements to the real thing looks counterfeit posters, in the use of color, I try to choose the gold and stone to color phase embellishment, so that colors vary among echo


Photo Name: quote the classics, the main of ideas and creativity,
1. Open the original image, create a curve adjustment layer, click Automatic 3. Open the sky material, Ctrl + A Select All, Ctrl + C copy, Ctrl + V paste, Ctrl + T to free transform the appropriate size and position drawing, mixed-mode pile, with a rubber or brush on the mountains and the blue lake clouds wipe
4.Ctrl + J copy the sky layer, Ctrl + T right > 5. in the replication layer of the sky layer to enhance the texture of clouds in the sky,
6. stamp apparent layers (Ctrl + Alt + Shift + E), Filter - Blur - Gaussian Blur. Radius of 15, mixed mode to Soft Light,
7, add a Hue Saturation adjustment layer, saturation -35, so that the screen is more gentle,
8. Add a channel mixer adjustment layer, the red channel +100,60 , -8, green channel 30. +100, if the intensity high, the beginning of the curve can be used to adjust the brightness level down, you can change the channel mixer adjustment layer of mixed-mode br>

Photo Name: sea coast,
1. Open the original, the new layer (Ctrl + Shift + Alt + N), and then stamp visible layers (Ctrl + Alt + Shift + E ),
2. into the channel, copy the green channel contrast relatively mighty, and then increase the contrast, white white, black, black, or with a brush (overlay mode) Ctrl + Green channel copy, extract constituency
3. the sky matter defer in, create disguises, struck a person
4. create layers, soft mode, to make the sky look better,
5. to do the water reflection, Ctrl + T Flip Vertical , the establishment of the mask, with a brush to draw their desired effect, Multiply mode effect better, for plans vary,
6. color, adjust according to personal habits, good use of the optional color,
7.Shift + Ctrl + Alt + E, stamp visible layers, layer mode Multiply, and then mask the darker corners of pressure, mainly for the water pressure of the dark, make the picture more balanced,
8. filter Mirror - Noise - Add Noise, number 3, the Gaussian distribution, monochrome, so that the same people and the sky, grainy,
9, the last fill the sky material


Photo Name: PS the photos transfer hand-painted effect,
1. open the original document, according to their own sense of color adjustment through the adjustment of the film, and dermabrasion, dermabrasion value not too much, (Neat image plug-in)
2. New Chart layer, the color is FEE7D6, (along to the color membrane character set), layer mode to Overlay and 25%, 20% with a brush in the face and cervix peel and light wrapping,
3. traits of the detailed work, pull the the mouth, the emergence Copy (Ctrl + J), with the smudge tool to smear on the lip, so that the skin becomes soft and smooth lips (not too much strength)
4. Create a new layer to the lips and face Department of color, color FDC1D6, layer mode to color, with a brush at the side of the lip and face painting,
5. with the Dodge tool, the range is the high light exposure of 25% to draw the high-light some of the lip with better tools, the range is the middle 20% of exposure, contrast enhance lips,
6. a new layer, color 8E1A25, brush pixel is 3, draw the inside of the inside, and then draw the lips of 2 pixels Department of lateral line, (high-light some parts of the line built dodge mask)
7. on the nose to circle the emergence, forgery, use painting tools to be cordial around the neb cultivated, and then use the Dodge tool range is a high light, 20% exposure to enhance the high-light under the nose partition, and then color 422B2D, a 2 pixel brush to draw the outline of the nose (if the short lines to make up for using better tools because the afterward)
8. circle on the eye brows Feather copy, with coated tools soft skin approximately the eyes, thinning eyebrows, and then use the Dodge tool range is a high light exposure of 15%, strengthening the high-light beneath the orbital part of the middle range of tools used to enhance and deepen the lines around the eyes,
9. coated tools used to apply some nice eyes, look softer, with some better tools to enhance black eyes, with the Dodge tool range is a high light exposure of 20% to strengthen the high-light part of the eye, so that the eyes look brighter,
10. color 080,101, 3-pixel brush, draw the lashes part (line Dodge tools to deepen the color depth can be used to make up) eyelashes lines can also be triggered by the path and some other methods,
11. with the Smudge tool to tarnish the prettier eyebrow, brow slightly darker color of the coarse spots namely smear back forward the disappear down, and then 2 pixels with a brush to paint eyebrows on the front lines of eyebrow, so eyebrows extra structured,
12. spot tool to prefer the hair brush, (according to hair texture to set brush shape), applied the process to be applied along the texture of the hair, not too much force to apply a uniform,
13. hair part applied to the brush with the normal interface, the (hair must be applied carefully)
14. Draw the hair texture to a new layer, layer mode to overlay, select the pencil pixels to 1 (the value of picture size according to figures to be), color, hair texture for the DFDFDF draw down the smooth lines
15. horsetail some select brush tool, brush lightly with a fork some of the paint along the texture, color, pattern layer above, br> 16. Create a new layer, the normal mode, select the brush tool, pixel 1, opacity 60%, 80% of flow, color is white, draw dynamic forehead hair,
17. raiment and necklaces partial coated Apply the softer tool, Dodge tool and then choose the range of high light exposure of 20%, raiment and necklaces to enhance some of the high-light
18. Synthesis, sharpen the picture as a whole, sharpening is 8, with fewer light tools for high-bit processing optical parts, the overall color amendment, the (modified to add some background light, highlighting the theme)


Photo Name: post-makeup Raiders,
1. Open the file , copy a layer copy of the
2. Select the duplicate layer by free transform to change the shortcut keys ctrl + t to make the characters more slender face shape
3. by Merge Layers (ctrl + e), the use of set cutting tools so that the screen from the new makeup, cut to more parts of,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. Yellow - 40, -20, -30, -80. white -0,0,0, -50. intermediate colors -0, -5, -5, -5
5. by curve (ctrl + m) to adjust the overall color, RGB full channel - output 214, input 174 and blue channel - output 131, input 124,
6. Image - Adjust - Color Balance (ctrl + b), the eclipse -10,0, +15. Highlight - 10,0, +2.
7. With a seal tool to evenly cover the skin around the mouth,
8. With a pen to circle dark bags under the eyes and face, the emergence of 60, the curve to lighten the constituency Dodge bags under the eyes and reduce the wording of facial muscles do not loosen,
9. persisted emergence of 60 constituencies, the curve lightening, the face, full point, output 146, input 113.
10. the high part of the circle of light out, feathering 60
11. curve lightening, the face, full point, output 138, input 118.
12. eyebrows, the eyebrows and top of the circle with the skin, the lasso tool, the emergence 5, copy layer, to duplicate the layer push down, in order to effect eyebrow shaping effect, stamp eyebrow shaping, this have to be very scrupulous
13. began to adjust the eyes, the election out of the eye part of the circle, copy layer
14. eye shadow pen surround the space to do, copy a layer, the curve of oppression dark color to adjust,
15. then uniform color eye shadow, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,
16. The details of color correction, the upper eyelid 1 / 3 portion of the Hue and Saturation: 0, -40,0
17. Circle the details of the basis of the upper eyelid eyelashes Department before the corner of lower eyelid 1 / 3, press DELETE opener to delete the selection, the exposed high light-bit,
18. delete some more eye shadow, feather 40
19. circle the details to the upper interior corner eyelid 1 / 2, press DELETE key to delete the selection, the exposed high light-bit
20. the eyes ring out, copy the layer, emergence 1, part of desaturation whites, mottled back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to addition the light,
22. eyes after the curve adjustment layer of bright copy, pen brush back the first part of the left eye, showing some shadows,
23. remove the pupil part
24. with eyes the color curve adjustment, so that the same
25. plus look high light
26. circle the lips, emergence 2, Curves lips high light, adjust the lip color
27. adjustment of the nose Liang Gaoguang, adjust shadow highlights
28. with the optional color palette as a whole, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light ): 0,2, -2.
30. liquefaction along the hair pull, combined with lens fan, light 182,35 mm focus,
31. Finally, in the right places to complete with flashing brush


Photo Name: The photo ink into effect,
1. Duplicate the layer and adjust - to color,
2. curve adjustment, increase the brightness contrast, input 114, output 186
3. Duplicate Layer, Filter - Brush Strokes - ink outline, stroke length of 5, 10-look fortensity, light intensity of 10, falling into a soft light layer mode, adjust the opacity,
4. Filter - Gaussian Blur, Radius 2.0 pixels,
5. Filter - Brush Strokes - spray, spray radius of a color, smoothness, 3,
6. Add a light brown solid layer, Figure Cen Enchanter is the color, adjust opacity, not transparency, some for small as possible,
7. point out a solid color layer and the layer in front of the eye to hide it, the new layer with the brush in the lanterns, trees, tiles, etc. with the appropriate color layer,
8. to restore secluded layers, modify the layer mode to overlay, by the effect to tune the details,
9. on the screen to fine-tune the overall efficacy until satisfactory results, not characteristic treads to vary


Photo Name: oil painting effect,
1 out premier filmed images. the sky with mask mask
2 parts.
3 Add the sky section, and placed in the bottom of the screen can be adjusted.
4 new layer to the third layer, chiefly to adjust the screen color.
5 opacity according to demand change, modify the layer properties to Soft Light.
6 In order to find oil in the texture effect, the color layer of material above and then added a layer of
7 modified layer properties to Soft Light, opacity changes on claim. This opacity is 86%
8 add mask, according to the contents of the screen need for appropriate trade-off.
9 in order to strengthen a sense of texture, then create a new layer, fill gray.
10 In the Add Noise filter and check the color for the Gaussian delivery, the number of custom.
11 layer to Soft Light.
12 mask according to the screen need to be properly adjusted.
13 ruckus, Add Noise - number 400, Gaussian distribution,


Photo Name: commercials color and devise,
1. Duplicate the layer, the new aisle mixed adjustment layer, the gray aisle, red +64% +2% green, blue, +10%, monochrome
2. New solid mixed layer, select the 575,046 color, blend mode to color,
3. new curves adjustment layer, ① - Input 68, output 32, ② - input 114, output 68, ③ - input 208, output 197,
4. New layer of a solid color, select 443B25 color, mixture mode to Color , prop down the Alt-click mask,
5.Ctrl + D to reinstate the default background color, Ctrl + Delete to fill the black mask the background color,
6. changing the screen, in the conversion to tall light and black parts of the tone, in mandate to enrich the color, with a brush inserted in the mask
that need some color, 300 pixels, opacity 10%, flow rate 100%
7. arrangement and design of the font
8. To make diagrams and shade colors have reverberated to the point of lips gloss lip symbols, create a fashionable layer, select the Linear Dodge Blend Mode, joined 90753D color, select the applicable brush above lip gloss, spread brushes, pixels 39,
9. exaggeration, the lip gloss reflective paint parts, inspect and perennial adjustment, drawing a look later the overall good lip gloss, this time the screen has a echoed the colors transform rich, merely too not overwhelming, equitable bring out a product,
10. If the product instantly with the body in the model, and people tune in to thirst after products in the color or use a mask out of the product can be directly inserted.


Photo Name: Wizard of marvelous effects,
1. Open the image, duplicate the layer,
2. dermabrasion simple, choice - the color range of point of their skin with a straw color, 103 color tolerance around, Ctrl + J be a new layer, Ctrl click to select, add the mask, with a brush (the foreground color to black), remove the hair around with some,
3. Filter - Blur - Gaussian blur of 1.7 pixels and reduce the layer opacity to achieve a natural dermabrasion effect,
4. Select - color range, hair color draw with a straw, with fodder + increase in the middle of the selection, the new curves adjustment layers, increase contrast, according to the picture properly adjusted,
5. the left mouse clasp mask curve 1, there constituencies, the new Levels adjustment layer Levels: 16,1.11,214
6. New hue saturation adjustment layer, red: -54, Yellow: -100
7. create a new group, to combine always of the on adjustment layer to facilitate the finishing neat,
8. New Group, for the hair color decoration, a new layer, with a brush (white), hardness 0, Layer Properties soft mode,
9. Create a new layer with the pen tool anchor lines (Pearl path), overbearing lines, neat point, straighten out the hair muddle in the orderly,
10. with the brush tool, F5 shortcut key to bring up the brush settings dialog carton, pixel 13, the hardness of 100%, 105% pitch, dynamic shape, smooth, angle 0, roundness 100 %,
11. switch to the path panel, select Stroke Path point of the right triangle to decide,
12. Double-click the path layer pearl, set the layer mode, Projection: architecture - Multiply, black, opacity 28%, angle 120 °, from 0, extension 0, size 5 pixels, the quality - variegated 0. Bevel and Emboss: structure - embossed effect, smoothing method, the depth of 120%, instruction, the shadow - the angle 120 °, Multiply end prototype, white, 33% opacity, Shadow mode Multiply, sky blue, opacity 36%.
13. with rubber tooling shape, add a mask, opacity 32%, applied beads, making beads and hair beneath the actual position with,
14. Create a new layer, the arrangement of different sizes with a sleet brush screen, adjust the snow layer styles, projection: structure - Multiply, black, angle 120 °, use the global light, distance 7, the expansion of 5%, size 1. The projection: Multiply, black, 12% opacity, angle 120 °, from the 7, blocking 10%. Outer Glow: structure - color filter, opacity 73%, lake blue pixels - the soft way, the size of 5 pixels, the quality - range of 50%. Bevel and Emboss: structure - Outer tilt style, methods, flat, 281% depth, direction, the shadow - the angle 120 °, using global illumination, height 30 °, high light pattern color filter, 75% opacity, shadow mode Multiply, black, opacity 75%
15. New soft coating, copy the background layer, selection foreground color (blue lake), R = 133, G = 244, B = 244
16. New Layer , brush hair, range,
17. new color layer, foreground - # 6fc8c8, R = 111, G = 200, B = 200,
18. new color layer, brush hair and beads on top of snow can be used eraser, set cheap opacity, transition. Range of regional hair coloring, multi-layers can be more natural.
19. fraught brush Star decoration interface,
20. to the skin, soft blue brush the whole layer, add cold tone and unity of the screen. Skin color has nothing to do new group, the new skin and soft layers, line brush hardness to 0, the foreground color to the lake blue. To the faces, light and dark being of high difference, used in blue and roseate. Multi-layers of the transition to the natural draw.


Photo Name: PS to the outlook watercolor effects,
1. take a photo with a white edge image landscape plan, as do the white side of the edge spillovers
2. hue saturation : +80 saturation, adjust the effect of the Impressionist,
3. Edit - Define Pattern.
4. built white fill layer, 50% opacity, to construct a perspicuous layer
5. pattern stamp tool, brush the cardinal diameter of 200,Lacoste Canvas Trainers, the pen comes with rainy medium brushes 45 election, mode regular, opacity 100% , retard in front of impressionist effect,
6. in a transparent layer pattern stamp painting, vision melodramas King strokes large and small details of the multi-hand strokes, adjusting the opacity of the top layer of the brush strokes view,
7. Copy Background layer to color filters - splash, 71% opacity, layer mode to Overlay
8. Filter - Texture - textured, opacity 100%,
9. filter - distort - the light diffusion 37%


Photo Name: A magical picture effect,
1. sketched with a pen on the back of a pinion shape,
2. in the new working directory into the path 1 , double-click the work path.
3. the path into a selection (Alt + Enter), copy the layer, emergence 3 pixels,
4. filled with white, select the appropriate intensity of use of painting tools, apply the appropriate edge.
5. Duplicate the layer, filled with assorted color that can be distinguished Layer 1, Layer Properties regulating transparency Oh,
6. in consensus with the method of making of a second in front of the wings, adjust the transparency of the right can black and white gradient adjustment layer and mask adjustment,
7. new layer and draw a circuitous selection using the brush circle in the constituency, then adjust the transparency,
8. Copy paste into the new background layer The Alpha-channel, in other areas appearance the top left edge of the black filling, use the Filter - Blur - Radial Blur: number 90, blur method: zoom,
9. Select Alpha channel (the channel holding down Ctrl), in Figure layer area new layer, fill light yellow,
10. with a pen generated beam path, the path into a selection, yellow and white gradient fill color,
11. adjust transparency, rub with the eraser by the base of the light is light becomes the natural,
12. People who sketched with a pen light in the path, the path into constituencies strokes with a painting in the edges, adjust transparency, combined with the eraser and smudge tool will achieve better results and spend more Several halo effect will be better


Photo Name: make a crumpled old photos,
1. to find a fold of the background, tug the photos will need to make the background layer, resize and crop, border and background to make it match,
2. Adjustment - Hue and Saturation, full size: -35 saturation, brightness +10,
3. adjustment layers into a soft mode , the effect of the old photos out,
4. hue saturation, full size: 0, -80,0
5. Duplicate Layer, Hue and Saturation - color: 340,24,0
6 . create a new layer on top, fill it with black,
7. Filter - Noise - Add Noise, increased old sense of the number of 25%, Gaussian distribution,
8. Mixed Mode to Multiply stacked at the end,
9. Image - Adjust - RP,
10. to remove the border of the mottled, with the rectangular selection tool to select the inside edge of the border, DEL key to delete the outline part of the variegated, <br red channel, a copy of the red channel curve adjustment, input 100, output 3,
2. with a brush or selection tool to fill the white figures and flowers,
3.Ctrl + press on the red copy of it into a selection, delete red copy of the return to the Layers panel,
4.Ctrl + C copy, Ctrl + V paste, figures and flowers matting completed,
5. Method One: New Fill Layer, R = 255, G = 128 , B = 173, the layer to color mode,
6. Method Two: saturation of coloring, the new hue saturation adjustment layer, check the front color, hue = 345, Saturation = 60, lightness = 0 , the new curves adjustment layer, 237,255; 188,130
7. Method three: new color balance layer, the middle tone - Levels: +100, -54, -20 / +100, -35, + 43
Shadow - Levels: +11, -7, +3. New optional color adjustment layer, red: 0, +21, -23, -5. Magenta: -100, -45, +32, -1
8. gradient mapping application, new Gradient Map 1, the layer to color


Photo Name: Ps-painting effect,
1. a new layer, brush with history , lax long brush 20,
2. the whole first sweep another, easily coated,
3. the brush to draw with 7 edges and details, and then a brush to draw facial features and clothing items,
4 . style painted face elaborate into tight mouth
5. with the blur tool to draw the face details
6. copy the 2, filter - Artistic Effects - painting painting, brush size 5, Sharpness 15 , Brush Type - Simple
7. Filter - Texture - texture, texture - canvas, zoom 84%, highlighting 5,Lacoste Finham SPM Trainers, light upper right


Photo Name: crack - Football Baby tutorial
1. Open the original image, duplicate the layer, filled with pure black, overlay mode.
2. New Hue and Saturation layers: Saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, lustrous 0, the material 69, 0, exposure, environment 8,
6. chop, add text decoration