Office Pro Plus 2007 Key Tutorial to Dual Booting

[hunankl132]

Sponsored Back links Windows Vista Leading Good reasons to prevent Vista Dual Booting Windows Vista and Windows XP Clean Set up Windows Vista other sections Articles Web site Genetic Engineering Greeting Cards IT Display 2011 Singapore Laughter HELL,Microsoft Office 2007 Professional Plus Serial Key! Nokia N95 NSeries Past Jobs PHP AJAX Domain Availability Checker Planescape: Torment Ultima Worlds Windows XP Windows Vista Further... singapore services Singapore Web site Style Web optimization Singapore Personal computer / Personal computer / Laptop computer Repair Service Video Conversion Hi8 Video8 miniDv VHS to DVD Service





Tutorial to Dual Booting Windows XP and Windows 7 / Windows Vista With Windows seven / Windows Vista Previously Installed
Version 0.52
This report reveals find out how to set up Windows XP with Windows 7 / Windows Vista already put in. No data is going to be lost, no excess software programs is needed and you'll decide upon which running system to boot everytime you electrical power on your strategy.

DISCLAIMER: Move forward at your own personal risk! The data right here is exact on the finest of my knowledge. I will not be held accountable if this document causes your pc to explode or burst into flames. In true major terms, if any corruption of info, hardware hurt or every other kind of damage/losses/etc. arises through the use of this document, I'll not be responsible for it. If you never similar to this, make sure you will not browse any further more. Do complete a full BACKUP of one's files to an exterior drive just before carrying out such operations.
Is this document intended to suit your needs? You ought to install Windows XP within a computer system which has only Windows seven / Windows Vista put in You might have created a backup of your technique just in case some thing goes wrong Swift Directs What on earth is Needed Planning of XP Installation Drive Putting in Windows XP Reinstating Windows 7 / Windows Vista Again Putting Back again XP inside the Boot Menu Assumptions This information assumes you want to set up Windows XP into Drive D. If you want to set up to one other drive, substitute the right drive letter for D. This manual assumes Windows seven / Windows Vista is installed in Drive C Windows 7 Technique Restore Points would be deleted as you boot to XP. This really is typical, and can only be averted if you ever conceal the Windows Vista / Windows seven drive from Windows XP. In case your challenging disk is SATA, it must possibly be operating on Enhanced IDE mode rather than in AHCI mode.

1) What on earth is Desired Windows seven / Windows Vista Original Set up DVD XP Set up Disc (preferably SP3) A drive with no less than 5GB totally free room 2) Preparation of XP Installation Drive
This guidebook will suppose that you're going to be putting in XP to Drive D. Should you have no such drive, this information will indicate you ways to produce a 'Drive D'.
Click Start out Click Personal computer Under Tricky Drives, there has to be an individual labeled "Local Disk C:"


If you happen to don't have a Drive D,Office Pro Plus 2007 Key, you must produce a new partition. There is no Drive D in this image,Microsoft Office Pro Plus 2007, so we are going to produce 1 Any time you you should not have a Drive D with not less than 5GB zero cost area, you need to make a partition as below. Creating a Partition
Skip this part if you should presently have a Drive D with at least 5GB of free space once you would like to install Windows XP to.
Click on Initiate On the right column, right-click Home pc on the left column Click on Manage Vista will want to pop a User Account Control box, click on Continue Home pc Management window opens Within the left column, expand Storage to reveal Disk Management. Click Disk Management


Disk Management Right-click the shaded area (or the area labeled C:) Click Shrink Volume... In "Enter the amount of room to shrink in MB", enter the amount of area in MegaBytes that you need to dedicate for Windows XP. We recommend no less than 5GB (that's 5,000 MB (MegaBytes)).



Should you are planning to use XP as your main working strategy, you may would like to dedicate a great deal more room for the drive as the process is going to be harder after installation of XP. Remember to ensure that Windows seven / Window Vista's drive has sufficient room left for its very own use (no less than 15GB) Click on Shrink
A new 'Unallocated' partition is created beside C drive
Right-click the Unallocated partition Click New Simple Volume... Click Next 2 times Note the drive letter assigned underneath "Assign the following drive letter". In our circumstance, it is E as the letter D is already taken up by the CD-ROM drive. We will need to fix this later on. Click on Next. Enter a name for the drive below "Volume Label". You may need to name it WINXP. Place a checkmark for "Complete a instant format"
Click Next Click Finish
The new drive will undoubtedly be formatted and built ready to be used Changing Drive Letters
Note: Skip this part if your Drive D previously factors to a valid challenging drive partition rather than to a CD-ROM drive.

Our new partition is now Drive E. For cosmetics sake, we prefer the new drive to be Drive D. Should you are fine (or require it to be these kinds of for some compatibility reason) Drive D to be the CD-ROM drive and E being the Windows XP drive, you’re able to skip this part.
In your task bar, close all programs except Pc Management At Laptop or computer Management, with Disk Management selected on the left, right-click the CD-ROM (D:) and click on Change Drive Letter and Paths... Click on Change... Underneath "Assign the following drive letter",Office 2007 Pro Product Key, select K (or every other letter besides D) Click on OK Click OK for the warning that appears Right-click the newly created partition labeled E: and click Change Drive Letter and Paths... Click Change... Under "Assign the following drive letter", select D Click OK Click OK for the warning that appears Right-Click the CD-ROM (K:) and click on Change Drive Letter and Paths... Click on Change... Beneath "Assign the following drive letter", select E (or every other letter besides D) Click on OK Click on OK for the warning that appears


The drives now have nicely assigned drive letters
At this point Drive D is ready for set up of Windows XP. 3) Putting in Windows XP Now we proceed to put in Windows XP. Insert the Windows XP Set up Disc into your Computer Restart your Pc and look for the "Press any key to boot from CD ..." prompt and quickly hit Enter. You only have a few seconds to do this earlier than it proceeds to start Vista



After you hit Enter, it will take sometime for Windows XP Setup to launch. If you will not see the prompt no matter how many times you restart, you need to configure your BIOS to boot from CD. At the welcome page, press Enter Accept the licence agreement by hitting F8 At the set up drive selection page, select the newly created D drive by hitting the down arrow in your keyboard. Do NOT select the default entry, which is Drive C.



For Windows seven systems: Drive C may be labeled as "Process Rese". In this situation,Windows 7 Enterprise Serial Key, you will want to select Drive E. You possibly can verify that it is the correct drive by checking whether the name in brackets for that row matches the name you gave just now in Step 2, which we suggested to give it as WinXP. During the image above, we gave it the name "New Volume" when we created the new drive.
Press Enter From the file procedure selection page, highlight the option "Leave the current file product intact (no changes)". Do NOT highlight any of the Format options. This has to be previously selected by default. At this stage, you are still able to boot Vista as per regular and you may terminate this tutorial safely if you ever wish.

Proceeding for the next step will set up XP and make Windows 7 / Windows Vista unbootable unless you follow the entire tutorial. Press Enter
Windows XP will begin putting in to Drive D (or to the drive you selected). Follow prompts normally until you see the Windows Bliss (the trademark wallpaper) . 4) Reinstating Windows 7 / Windows Vista Again
At this stage, you need to have completed setting up Windows XP to Drive D (or to the drive you selected). You would have noticed which you can only boot into Windows XP now.

We need to fix Windows seven / Windows Vista back together with XP and it is where the Windows 7 / Windows Vista set up disc comes in
Insert the Windows seven / Windows Vista DVD and restart your Pc Restart your Personal computer and look for the "Press any key to boot from CD or DVD . . ." prompt and quickly hit Enter. You only have a few seconds to do this prior to it proceeds to begin XP


Press any key to boot from CD or DVD . . .
Click on Next at the "Install Windows" screen. Click on Repair your personal pc at the bottom left of the window
Windows 7 / Windows Vista Setup searches for Windows seven / Windows Vista installations After the search is completed, click Next


Program Recovery Click on Startup Fix. For Windows seven systems, just proceed to click on Next.
Vista Setup will attempt to repair the boot sector Click on Finish 5) Putting Back again XP in the Boot Menu
After the restart, you need to be again in Windows 7 / Windows Vista now. Unfortunately, now you cannot access Windows XP. Here's easy methods to put again XP into the boot menu.
Option one: Run a Batch File (Automated) Right-click this link and Save Target As Save to your desktop Insert the Windows seven / Windows Vista Setup disc to your E drive In case your drive letters are different, you will definitely need to EDIT the bat file and replace E: with the appropriate drive letter (thanks juliabird) Go to your Desktop. Right-Click the file, and click Run as administrator
Note: The third command may give an error which can be safely ignored.

Option two: Run Commands Manually Insert the Windows seven / Windows Vista Setup disc to your E drive Click Start out Type CMD and press Ctrl+Shift+Enter (press and hold Ctrl, press and hold Shift, press and hold Enter, release all) Windows must pop a User Account Control box, click on Continue You must see a command prompt.

After typing each line below, press Enter in your keyboard. Do NOT copy and paste, you must type it out. Note that we are assuming Drive E to contain your Windows seven / Windows Vista installation disc and Drive C to contain the Windows seven / Windows Vista set up. Substitute the drive letters during the 2nd and 4th lines where wanted.


cd %windir%

e:\boot\bootsect.exe -NT60 All

%windir%\system32\Bcdedit -create ntldr -d "XP"

%windir%\system32\Bcdedit –set ntldr device partition=c:

%windir%\system32\Bcdedit –set ntldr path \ntldr

%windir%\system32\Bcdedit –displayorder ntldr –addlast

Note: The third command may give an error which can be safely ignored.


The DOS Commands and the responses
For Windows seven systems, you'll need to additionally copy the NTLDR and NTDETECT.COM files from your Windows XP Disc to your C Drive. Go to Start off > Computer Right-click your CD-ROM drive containing your Windows XP Disc and click on Open On the the best right of the window, type NTLDR inside search box Copy that file to your C Drive (Select the file > Organize > Copy > Go to C Drive > Organize > Paste) Search for NTDETECT and copy that file as well to C Drive [ thanks to distrakted ]
That's it. Restart your system, and a menu will appear to ask your choice of operating strategy to boot up.

If you get errors like "The boot configuration info store could not be opened" - you are not running the file / command prompt as a administrator.
Revisions July 26 2008 - v0.5 First Release on the public in Bootstrike.Com Sept 23 2010 - v0.52 Updated for Windows seven, which is similar to Vista
Last Updated 23rd September 2010

Errors? Omissions? Need Help? Know something? Post your queries inside the comments below

This document is Copyright(©) 2001-2010 by G.Ganesh.
12 comments