| Back to logs list
22119385 2008 年 05 月 08 日 07:00 Reading (loading. ..) Comments (0) Category: Personal Diary
this article The main contents are telling the user how to create a magical combination of batteries and how to install the time machine. Magic battery combination is mainly used to any PSP system, including official】 【brush machine to use, time machine allows the user to a PSP at the same time a number of different versions of the kernel to install the necessary software
:
magic battery V5 enhanced Version fool package: which includes 1, UPMSv4 the Starter Edition cso, less than 5M, battery and memory stick entirely to do it. 2, need to be copied to the memory stick kd, elf, registry three folders.
time machine dummy package: which includes the old 1.5 and P with 3.40OE, the new P old and P can be mixed with the 1.5 version and the new P +3.40 with the 3.60M33, these four are packaged separately , you can install one separately, to avoid unnecessary download
time machine installer, will be used writing ipl loader can not do because no matter
do time machine, electric V5 enhanced version of God is necessary, therefore, an enhanced version of V5 tutorials do first, then do not do the time machine you choose.
preparation:
first download the magic battery pack V5 enhanced version of a fool, to extract out of the cso copy to memory stick root directory of the iso folder, elf, kd, registry copy the three folders to the Memory Stick root directory, then in accordance with the following three steps. Again, the line rods and some groups to do the magic wand do not have to format the memory stick,
cheap mbt shoes, memory stick directly to do with the game. Suggested greater than or equal 64M, 4G memory stick less than or equal to do. 8G memory stick I have not tested. If you stick with the group, to be safe,
mbt sale, press the ring into cso format the memory stick, then manually create the directory structure of a good memory stick, and then start from the first step in implementation. Once the finish can not read memory stick after the situation do not panic, take out the memory stick from the psp, then you can go into. If not enough, you can try to read other reader device after formatting. At the same time it also shows a group of your memory stick stick stick in the group.
three steps as follows: (before the memory stick in your own back up important files, please follow the steps to see the corresponding text image, the blind do not see the picture itself)
1, in the psp run cso. System greater than or equal 3.80m33 of the actual situation according to their own look: (Figure 1,2) (Figure 3)
Figure 1: Note the comments below the images
Figure 2: From the press box in Figure 1, the brush into several files,
mbt lami, then as shown in Figure 2, according to X to exit and re-run the cso, then as shown in Figure 3, you can press X to enter
Figure 3: Note the comments below the images is less than 3.80m33
system by cross directly into the (Figure).
2, enter the first IPL Menu
and then automatically return to the main interface.
3, into the second Battery Menu (if you have a magic battery, go to Step 3 without having a whole)
select Create Pandora Battery (Service Mode) (Figure)
Well, now, power of God a've done! Speed can it? Exit CSO, shutdown,
mbt uk, and then hold down the L key to boot the old P to enhance the moderator V5 interface, nothing at boot to boot. Hold down the L button to start the new P enhance the moderator for the V5 interface, the new P If you want to boot, upgrade to 3.90m33-2 or higher. With battery and magic memory stick can not boot normal, with normal battery and magic memory stick to boot. In other words, whether the new P old and P, if the power of God to enter the menu, press L to boot; old P nothing by booting into the XMB to play the game properly,
mbt shoes clearance, the new P If you want this way, at least 3.90m33- 2 system, or power of God only when God electricity. Now the magic combination in hand, what system to put the brush corresponding to the system firmware on the Memory Stick root directory, for example, to brush 3.90m33-3, to take 3.9 firmware named 390.PBP on the Memory Stick root directory, other the same reason. Bus Firmware Download
Note:
1, if the group sticks in accordance with the above steps do not succeed, to re-enter the cso, the implementation of the main interface cso Format & Repartition Memory Stick, manually rebuild the folder on the Memory Stick, cso run into the second step can be successfully completed, but based on feedback it seems, do not rule out that some groups can not bar the possibility of success.
2, if the new motherboard 85v2 P,
mbt shoes, making the battery option is gray not optional. Can use this to determine whether the 85v2 motherboards.
3, if your system is greater than or equal 3.80m33 and brush before the time of entry into the press box, a number of documents, and now look to run cso, in the initial screen, press Triangle, put the brush into the paper removed. Figure and then exit. This step can not do do, do not care. In fact those files are brush into the DA's memory stick speed patch.
4, if you use the new P, and do not want to upgrade to multi-boot 3.90m33-3, you can restore the battery batteries, when needed converted to the magic battery.
5, Memory Stick root directory file though if eeprom.bin delete it
6, Figure 8 Current Serial If the 0xffffffff, to have a magic battery. If it is displayed behind ordinary batteries unknown or normal. In Figure 8, select the Make Normal Battery third battery can be magic recovery, the results shown, then press X to exit.
7, once the power light automatically after the battery discharge light but black screen situation, remove the battery, with power to boot and then see Note 1
8, brushing systems Should in the course of a blue screen, simply press ring repair
9, the old P down 1.5 1.5 firmware needs to be renamed 150.PBP
into the Memory Stick root directory to install time machine
do some preparatory work, download from the Downloads section above you need time machine system. P only needs personal advice old 3.40OE, and the new 1.5 +3.4 P requires only a hybrid system is sufficient. Additional time machine is also very simple, two-step:
1, extract the compressed folder from the TM to the Memory Stick root directory, if you install multiple systems, prompted to overwrite, then choose to overwrite, no problem .
2, download the attachment of the time machine setup, the TIMEMACHINE folder into ms0: / PSP / GAME to run into the time machine in the installation screen, select the first item (pictured), there are two ok then press X exit.
time machine then you can do before God and the power V5 enhanced co-exist, and you copy what time machine which can enter the system, boot keys corresponding to the following:
× = 1.5
○ = 1.5 +3.4
△ = 3.40OE
port = 3.60M33
L = V5 before the power of God to do the enhanced version
nothing is normal at boot boot
Note:
1,3.60 M33, I did not unpack, you need to 360.psar into the Memory Stick root directory, then in the time machine interface in the production of manual installation.
2, TM folder in the config.txt is set to boot keys, you can change.