Programming a week export electronic natty thermos

run the program settings:
setting run the program, you can give us every day of the week at another times, the comfort temperature and the economic temperature settings.
1, move the switch to flashes ashore the screen. (button 1 = Monday)
3, 24 小时 button is used for each specific time each day in the comfort temperature and the specific set of economic temperature. When characterizing each duration of each button is pressed , the corresponding part of the switch operation. (example: LCD stop off = economic temperature.
4, when the temperature setting you have achieved,GHD Straighteners, press No longer set in film, time after 5 seconds the thermostat will automatically return to the run mode.
5,GHD Benefit Straighteners, in mandate to set the digit of days on the additional, repeat the above deeds or use the copy function. (see In the The day of the button.
3, prompt: The final release was the daytime that you want to copy the button to complete the copy of the program.
4, copy emerge froms, repeat treads 1 via 3 above.

program control run:
will switch to Days will run the program manually.
temperature settings manually:
You can use the button > shut down the system - action mode antifreeze:
antifreeze when you move the switch to the position, timing thermostat control system is running merely in the hindrance of 6 ℃ ambient temperature drops underneath the equipment,GHD Carry Case & Heat Mat, piping to avoid chilly.

transient temperature changes:
controlled mode in the program that you can program in a specific phase of the temporary change in temperature.
example: you have the settings program, in 14:00 and 17:00 among the comfort temperature is 22 ℃, in 15: 30 Do you want to lower the temperature to 19 ℃, and then you set the temperature to 19 ℃, this setting is not lasting, it will remain until 17:00 until the end stage of this process.
controlled mode in the program will switch to Recovery mode automatically changes the temperature in the afterward procedure.
Hint: You can move the switch back to > A = day of the week
B = equipment sprinting
C = summer (air conditioning)
D = battery drain
E = the present time exhibit
F = holiday program activation
G = winter (heating)
H = the current temperature display

timer thermostat control buttons:
A = Settings button
B = operating mode switch
C = holiday button button
D =
E = reset button
F = Language Selection button
G = day of the week selection button
H = solace temperature, time of economic temperature selection button
I = Summer / Winter selection button

switch control buttons:
AUTO PROG = program controlled - program settings manually run
antifreeze mode

comfortable temperature setting
lower the temperature setting
time setting

start time of the thermostat:
in the battery to power later the timer thermostat, with a pencil peak, click RESET button a few seconds the display will show All parts and display characters. (self-timer thermostat testing procedures).
language settings:
will switch to AUTO PROG or manual, antifreeze position, press the Select button to select the day of the week's use of language , the alternative of language is Italian (I), German (D), Spanish (E), Dutch (NL),GHD Leopard Grain, Portuguese (P), French (F), English (GB).

Time and appointment settings:
move the elect button to + alternatively - to scale up progress.) press accustomed to validation the setting.
set switch button to return to the AUTO PROG rank controlled mode into the agenda.
to alteration the time and date settings, shake the switch back to
week program set temperature:
open the front cover of the thermostat regularly move the switch to the suitable location: cozy temperature, br> The temperature selected by using the Settings button atmosphere temperature is higher than the economic temperature
= Comfort temperature is fewer than the economic temperature
Tip: If you press the reset button to enter the temperature data will be cached in the memory of time the system thermostat.

holiday settings :
timer thermostat temperature can be some time away from home settings when you go on recess. This setting can help you save
shut down the system money, and while you work home when you feel competent apt the warmth of the room.
move switch to br> by Holiday button, the display shows shown in Figure 15.
use the display,GHD Purple Butterfly 2011, ordinarily for hours.
press you set the program will not move.
clear holiday settings equitable repeat a move br> control equipment system according to the barrier, the summer air conditioning or winter heating boilers, thermostats can be summer time / winter season, choose Settings:
Press the summer / winter culling button, you tin switch back and along for the season. (Fig. 16 )
on the display, highlight the :
reception the reset button (res);
does no change the settings ahead running the program will no change
preset temperature (comfort or economic)
cleared the clock and day of week set
Clear always the other features are being used (temperature changes,GHD Green Straighteners, holidays, running the program)
reception RESET button, the clock thermostat will be / p>