| Back to logs list
142911 2010 年 12 月 02 日 19:57 Reading (loading. ..) Comments (0) Category: Technical Documentation
surveillance video lines and control lines are mainly based on the selection of monitoring points to determine the distance to the host, because of the quality of all the different manufacturers of wire,
coach shoes, the following conclusions apply only to the wire in my company, and there is no interference in the environment circumstances apply, use other company's cable customers, do not press the company's standard construction.
1, the video camera to monitor the host line
distance ≤ 100 m, with 75-3/64P video cable. distance of the camera to the monitoring host
≤ 200 meters, with 75-3 / 96P video cable.
camera to monitor the host distance ≤ 300 m, with 75-5/96P video cable.
camera to monitor the host distance ≤ 500 m, with 75-5/128P video cable.
camera to monitor the host distance ≤ 800 m, with 75-5-1/128P video cable.
2, PTZ control line
head and controller from ≤ 100 meters, with RVV6 × 0.5 sheathed cable.
head and controller from> 100 m, with RVV6 × 0.75 sheathed cable.
3, camera control lines
by RVV4 × 0.5 jacket line.
4, communication lines
decoder to control the host camera distance ≤ 200 m, should be shielded wire
RVVP2 × 0.5 camera to the monitoring host distance ≤ 500 m, should be used RVVP2 × 0.75 shield
5, camera power cord
power cord to the camera before they can be reasonably calculated the matching, the specific calculation method, which is not introduced there, I often do the following to select multiple thick wire works listed,
coach purses,
大爱《直到世界的尽头》（《世界が终るまでは》） - Qzone日志, we want to project help:
first introduced the camera under the common 12V power supply operating current:
ordinary bolt or Hemisphere: about 200 ~ 300mA operating current can select 500MA-1A power supply
Camera: about 350 ~ 400mA operating current can choose to 1A power
infrared camera: small medium work for the current option 1A :600-700MA power
large infrared camera operating current 1000MA-1200MA 2A power supply can choose
a monitoring system,
coach wallet,
蜗居 - Qzone日志, the camera can be individually powered, can be more centralized power supply, power supply if it is more than the camera focus, the current number of cameras required current. Suppose a monitoring system to a unified common Dome Camera 10 a power supply,
coach sunglasses, because the current one hemisphere is 300-400MA,
coach handbags, so the current is 10 cameras 3000MA-4000MA, you should select the 5A or 6A of the power supply.
power cable diameter monitoring system choice: Suppose four cameras to monitor the distance of less than 40 meters: each camera individually cloth RVV2 × 0. 5 power cable to the monitoring host and use a small switching power supply, if the 4 hemisphere or bolt, you can choose 2 or a 12V2A 12V1A power supply, four cameras to take power by way of parallel, more to save wire,
coach women shoes, if the larger number of cameras, 8 cameras, high-power 12V should be used centralized power supply DC power supply, this time the current is too large, we must consider the voltage drop across the power line, under normal circumstances, 8 camera system, the distance does not exceed 40 meters, can the wire cloth RVV2 * 0.75 centralized power supply, if the concentration of power 16-way system,
谎言vs真实・再回首 - Qzone日志, we must choose RVV2 * 1.0 of the power cord. Described above is the camera to monitor the host no more than 40 meters away from the choice of the power cord, if the distance from the camera to the host more than 40 meters, we must consider the use of centralized power supply 220V to the transformer into the camera side to the camera 12V supply, under normal circumstances, 220V power supply, as long as the system is not too large, 8 below , within 200 meters distance, you can select the wire RVV2 * 0.5, if 8 or more, are powerful infrared cameras to To consider the use of the power cord RVV2 * 0.75 power, the other if the distance is farther, in order to ensure safety, it is best to use RVV2 * 1.0 of the wire. selection and calculation of the power cord is complex and involves more aspects of the parameters, so that there would not be specific algorithm, the above conclusions are the practical applications of the lessons learned, is only for reference, the company responsible for any related liability. Select the camera monitoring system
label power line work
louboutin heels 超级无间道——男篮打爆德国,我们不
Linear Mode
