Very useful

The teacher taught us all in here for two annuals PS
Share of: Image Mirage has been shared 20 times Comments (0) copy the interlock sharing photos reproduced Report

name: send up the photo a soft blue and yellow - a simple way,
1, open the original material, according to background layer Ctrl + J to copy the layer, point of access panel, select the blue channel, image> apply image, layer as the background, mixed to Multiply, opacity 50%, RP tick,
2 back to the Layers plate, create a curves adjustment layer, and blue channels: 44,182, red channel: 89,108
3, create a new layer, fill it with black, layer blending mode to Multiply, opacity 60%, choose the Elliptical Marquee Tool constituency middle, press Ctrl + Alt + D Feather, a value of 70, and then double-click the Delete key to delete, again on the text, complete the final results.


Photo name: bring up photos beauteous red and yellow,
1, open the original material, Ctrl + J to copy the background layer a layer, press Ctrl + Shift + U to color, Enforcement: Filter> Fuzzy> Gaussian Blur, number 4, for the color filter layer blending modes, layer opacity to 27%.
2, create a new layer, press Ctrl + Alt + Shift + E stamp layers, layer blending mode to color. 3, create a gradient map adjustment layer, purple - orange, Alt + Ctrl + G with clipping mask.
4, create the brightness / contrast adjustment layer, -5, -21
5, create a Smart Sharpen adjustment layer, set to the default value, number 46, radius 0.8, Gaussian blur,
6 , create a Levels adjustment layer, 8,1.00,255
7, the color adjustment layer to create an optional, Red: +17, -8, +16,0, yellow: -54,0, +10, + 18, white: -5,0,0,0,


Photo name: bring up nostalgic landscape photos,
1, open the original copy layer
2, curve adjusted merit of RGB: 109,99
3, hue saturation, value: 0, -39,0
4, color balance, value: 0,0, -34
5, optional color neutral colors: 0,0, -20,0
6, a new layer, fill d7b26c, layer mode overlay, opacity 56%,
7, the clouds pull material into the chart, into the original Figure above, soft layer mode, the outside part of the sky in addition to wiping out, back layer (Ctrl + Alt + Shift + E)
8, optional color, black: 0,0, -14, -5
9, a new layer, fill 0d1d50, excluding layer mode, copy a layer, filling 52%
10, curve adjustment, numerical RGB: 128,155
11, color balance, value: +24, +7, -64, filling 70%
12, gradation, value: 29,1.00,227, filling 58%
13, optional colors, independent colors: +16, +12, -11, +5
14, back layer (Ctrl + Alt + Shift + E), color balance, value: +24, +7, -64, filling 38%
15, back layer (Ctrl + Alt + Shift + E), opacity 46%, filling 48%,
16, Ctrl + E Merge Visible, sharpening photos look


Name: rejuvenation treatment the figures slight skin,
1. Duplicate the background layer. Filter - Blur - Gaussian blur radius to 10.
2. set the layer blending mode to Double-click the layer label to open the right mixture of options. In the Advanced Mixed, cancel advanced R and G channels,
3. Use of the color balance of the image curve, along to the picture to determine
4. Create a new layer, select the repair Brush (J), select layer specimen. Freckles or blemishes on the large, sham removed.
5.ctrl + shift + alt + E, stamp entire layers, tick the peel part, you can prefer their own way, I prefer the pen tool, but you can likewise use the Polygonal Lasso tool, to Note that to handle with the skin, so to remove the eyes, eyebrows, lip, noses. Anti-selection (ctrl + shift + i) delete the addition to the skin, excess parts.
6. Filter - Blur - Gaussian Blur with a radius of 20. Set layer opacity to 75%
7.CTRL + J, duplicate the layer 3 filter - Other - High Pass radius of 4, mixed mode to >

Photo Name: just let the stone have layers
3. the right to adjust the blue channel copy to the inside layer, and to add the color you want, I used the deep orange
4. to copy the base map of the red channel to the layers, using masks to remove the sky and stone, leaving only the lawn, and to add color with the Gradient Map
5. Open the material lightning pellet, copy the contrast of the red channel to have the largest file
6. Select blend mode to Overlay and adjust the situation and size, making it a light source, remove some needless asset (to decide), then use the radial blur filter to knob it radiation, allowed the formation of the beam emitted
7. to copy the pedestal chart of the red channel inside the channel, enhancing the compare, so namely the grass part of the high-light revealed more pronounced, and then select the layer of high optical part of the paste inside, with pearly fill, layer mode to Overlay, and then use the mask to off the white part of the sky, leaving only part of the grass, the grass appears to be shine light in the light knowledge
8. Select the mask layer 1 and then invert the selection, selection by the sky, addition curves and hue / saturation adjustment layer to adjust according to personal predilection and the naturalness of the color you favor
9. Finally, some posters add elements to the real thing looks ######## posters, in the use of color, I try to choose the gold to the color of the stone and decorated with to be reverberated amid the color photos


name: sea beach,
1. Open the original, the new layer (Ctrl + Shift + Alt + N), and then stamp visible layers (Ctrl + Alt + Shift + E),
2. into the channel, copy the green channel contrast relatively strong, and then increase the contrast, white white, black, black, or with a brush (overlay mode) Ctrl + Green channel copy, extract constituency
3. the sky material postpone in, create masks, struck a person
4. create layers, soft mode, to make the sky look better,
5. to do the water reflection, Ctrl + T vertical flip, create masks, with a brush to draw their lusted effect, Multiply mode effect better, for plans vary,
6. color, adjust according to personal habits, optional Color is serviceable,
7.Shift + Ctrl + Alt + E, stamp apparent layers, layer mode Multiply, and then mask the darker turns of pressure, effectively for the water pressure the black, so the picture is poised Some,
8. Filter - Noise - Add Noise, the number 3, Gaussian distribution, color, make the characters and the same grainy sky,
9, the last fill the sky material


Photo Name: PS effects in rotate hand-painted photographs,
1. open the original file, according to their own sense of color adjustment via the adjustment of the film, and dermabrasion, dermabrasion value not too much, (Neat image plug-in )
2. a new layer, color FEE7D6, (according to the color membrane character set), layer mode to Overlay and 25%, 20% with a brush in the face and cervix skin and light coating,
3 . features of the detailed work, cutting out the mouth, the emergence Copy (Ctrl + J), with the Smudge tool to smear on the lips, so that the skin becomes soft and flat lips (not too much strength)
4. New layer, to the lips and face paint, the color is FDC1D6, layer to color in the lips and face with a brush for painting the side,
5. with burn tool, the range is the high light exposure of 25 % draw the lip part of the high-light, with the Burn tool, the range is the middle 20% of exposure to enhance lips contrast,
6. a new layer, color 8E1A25, 3 pixel brush, draw the inside of the inside , then draw 2 pixels outside the lip lines (high-light some parts of the line built shun mask)
7. on the proboscis apt circle the emergence, forgery, use painting tools apt be cordial around the nose cultivated, and then Dodge tool with a scope of tall light exposure of 20%, strengthening the high-light below the snout partition, and then color 422B2D, a 2 pixel brush to paint the profile of the nose (the line whether the light using the Burn Tool to make up for the next)
8. eclosion circle replication of the eye brows, eye brows with the smudge tool around the soft skin thinning, and then use the Dodge tool range is a high light exposure of 15%, strengthening the high-light under the orbital part of the range with the Burn tool middle, deepening the lines around the eyes,
9. wrapped tools used to apply some fine eyes, look softer, with some better tools to promote black eyes, with the Dodge tool range is a high light exposure of 20 % to promote the high-light part of the eyes, making eyes look brighter,
10. color 080,101, 3-pixel brush, draw the lashes part (line Dodge tools to deepen the color depth can be used to make up) can also be used eyelash line paths ways triggered,
11. with the Smudge tool to tarnish the prettier eyebrow, brow slightly darker color of the rowdy blots that smear back according the discolor down, and then 2 pixels with a brush to draw in the eyebrow eyebrows front lines, the eyebrows more structured,
12. smudge tool to choose the hair brush, (according to hair texture to set brush shape), applied the process to be applied along the texture of the hair, not too many compel, applied to be uniform,
13. hair brush partly applied to the regular interface, the (hair have to be applied carefully)
14. Draw the hair texture to a new layer, layer mode to overlay, select the pencil pixels 1, (values ​​according to figures to set the image size),GHD Diamond Flag 2011, color, hair texture for the DFDFDF draw down the smooth lines
15. horsetail some select brush tool, brush lightly with a fork down the texture of some painting , the color layer model above,
16. Create a new layer, the normal mode, select the brush tool, pixel 1, opacity 60%, 80% of stream, color is white, draw dynamic forehead hair,
17. clothes and necklaces with the stain tool applied some of the softer, and then select the Dodge tool with a range of high light exposure of 20%, clothes and pendants to enhance some of the high-light
18. Synthesis, sharpen the picture as a whole, Sharpening is 8, with the Dodge tool to highlight some of the little processing, the overall color amendment, the (modified to add some background light, highlighting the theme)


Photo Name: post-look Raiders ,
1. Open the file, copy a layer copy of the
2. Select the replica layer by free become to change the shortcut keys ctrl + t to make the temperaments more slim face shape
3. by Merge Layers ( ctrl + e), the use of cutting tools so that the shade contains the new essay, cut off the accessory part,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. Yellow - 40, -20, -30, -80. white -0,0,0, -50. intermediate colors -0, -5, -5, -5
5. by curve (ctrl + m) adjust the overall color, RGB full channel - output 214, input 174 and blue channel - output 131, input 124,
6. Image - Adjust - Color Balance (ctrl + b), the shadow -10,0, +15. Highlight - 10,0, +2.
7. With a stamp tool to evenly cover the skin around the mouth,
8. With a pen to circle dark bags under the eyes and face, the emergence of 60, the curve to lighten the constituency Dodge bags under the eyes and reduce the statement of facial muscles do not loosen,
9. continued emergence of 60 constituencies, the curve lightening, the face, full point, output 146, input 113.
10. the high part of the circle of light out, pluming 60
11. curve lightening, the face, full point, output 138, input 118.
12. eyebrows, the eyebrows and top of the circle with the skin, the lasso tool, the emergence 5, copy layer, to duplicate the layer move down, in order to achieve eyebrow shaping effect, stamp eyebrow shaping, this must be very careful
13. began to adjust the eyes, the election out of the eye part of the circle, copy layer
14. eye shadow pen circle the area to do, copy a layer, the curve of pressure dark color to adjust,
15. then uniform color eye shadow, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,
16. The details of color adjustment, the upper eyelid 1 / 3 part of the Hue and Saturation: 0, -40,0
17. Circle the details of the basis of the upper eyelid eyelashes Department before the corner of lower eyelid 1 / 3, press DELETE key to delete the selection, the exposed high light-bit,
18. delete some more eye shadow, feather 40
19. circle the details to the upper internal corner eyelid 1 / 2, press DELETE key to delete the selection, the exposed high light-bit
20. the eyes ring out, copy the layer, emergence 1, part of desaturation whites, mottled back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to amplify the light,
22. eyes after the curves adjustment layer of bright copy, pen brush back the first part of the left eye, showing some shadows,
23. remove the pupil part
24. with eyes the color curve adjustment, so that the same
25. plus look high light
26. circle the lips, emergence 2, Curves lips high light, adjust the lip color
27. adjustment of the nose Liang Gaoguang, adjust shadow highlights
28. with the optional color palette as a entire, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light ): 0,2, -2.
30. liquefaction along the hair pull, combined with lens flare, light 182,35 mm converge,
31. Finally, in the right places to complete with flashing brush

1. sketched with a pen on the back of a wing shape,
2. in the current working catalogue into the path 1, double-click the go way.
3. the path into a selection (Alt + Enter), copy the layer, emergence 3 pixels,
4. filled with white, select the appropriate intensity of use of painting tools, apply the appropriate edge.
5. Duplicate the layer, filled with differ color that can be told Layer 1, Layer Properties regulating transparency Oh,
6. in consensus with the method of product of a second in front of the wings, adjust the transparency of the right can black and white gradient adjustment layer and mask adjustment,
7. new layer and draw a circular selection using the brush circle in the constituency, then adjust the transparency,
8. Copy paste into the new background layer The Alpha-channel, among other places outside the top left corner of the black filling, use the Filter - Blur - Radial Blur: number 90, blur method: zoom,
9. Select Alpha channel (the channel holding down Ctrl), in Figure ground area new layer, fill light yellow,
10. with a pen generated beam path, the path into a selection, yellow and white gradient fill color,
11. adjust transparency, rub with the eraser at the bottom of the light is light becomes the natural,
12. People who sketched with a pen light in the path, the path into constituencies strokes with a painting in the edges, adjust transparency, combined with the eraser and smudge tool will achieve better results and cost more Several halo effect will be better


1. to find a fold of the background, drag the photos will absence to make the background layer, resize and crop, siteline and background to make it mate,
2. Adjustment - Hue and Saturation, full size: -35 saturation, brightness +10,
3. adjustment layers into a soft mode, the effect of the old photos out,
4. hue saturation , full size: 0, -80,0
5. Duplicate Layer, Hue and Saturation - color: 340,24,0
6. create a new layer on top, fill it with black,
7. Filter - Noise - Add Noise, increasing the old sense of the number of 25%, Gaussian delivery,
8. Mixed Mode to Multiply,
9. Image - Adjustments - Phase, br> 10. to remove the border of the mottled, with the rectangular selection tool to select the inside edge of the border, DEL key to delete the outline part of the variegated,
11. clashes with the eraser tool around the motley characters


1. Duplicate the layer, into the channel, copy the red channel, a copy of the red channel curve adjustment, input 100, output 3,
2. with a brush or selection tool to fill the white figures and flowers ,
3.Ctrl + click on the red copy to make it into a constituency, remove red copy of the return to the Layers panel,
4.Ctrl + C copy, Ctrl + V paste, figures and flowers matting done,
5. Method One: New Fill Layer, R = 255, G = 128, B = 173, the layer to color mode,
6. Method Two: saturation of coloring, the new hue saturation adjustment layer , coloring the before tick, Hue = 345, Saturation = 60, Lightness = 0, the new curves adjustment layer, 237,255; 188,130
7. Method three: the new color balance layer, the middle tone - color Order: +100, -54, -20 / +100, -35, +43
Shadow - Levels: +11, -7, +3. New optional color adjustment layer, red: 0, +21 , -23, -5. Magenta: -100, -45, +32, -1
8. gradient mapping application, new Gradient Map 1, the layer to color


1. Open the original image, duplicate the layer, filled with pure black, overlay mode.
2. New Hue and Saturation layers: Saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, shiny 0, the matter 69, 0, exposure, environment 8,
6. chop, add text elaboration


1. Duplicate Layer, Filter - Blur - Radial Blur: digit 71, fuzzy method - Zoom, Quality - Good,
2. create templates, sparks car, then smear the cycles struck a dynamic,
3. Levels - optional colors. Add material, rendering the whole air, the details of adjustments made with the Dodge, the chief diameter of 5, the hardness of the minimum


1. In the RAW to adjust the brightness, contrast, etc., for arranging the foundation afterward the adjustments, br> 2. to add the sky material, simple transparency, make the sky into the layer,
3. New Adjustment Layer, Selective Color - Neutral Color: +20, +6, +7, -4, perfect, Unified little water color,
4. khaki color fill, opacity 54%, filled with dark blue color, opacity 61%, filling deep lilac, opacity 76%,
5. fine-tuning, high light and intermediate the choice of adjustment methods and the resulting mask, high-light selection method: Calculation - Source 1: The layers merge layers, gray channel, the source 2: The layers merge layers, gray channel, Multiply blending, opacity 100 %.
6. midtones selection method: Source 1: Merge layers, gray channel, the source 2: Merge layers, gray channel, Multiply mixed, opacity 100%.
7.RGB get inside the mask channel, with a curve adjustment, high light adjustment: the black box on the left in the penultimate line of the middle line, blue line to the tear point, the middle tone adjustment: Up to adjust some,
8. reflected light mask, lasso select constituency, emergence, overall provides bright,
9. warship debris reduced saturation, saturation: -36,
10. sharpening the overall


1. Open the image duplicate the layer, Ctrl + Alt + ~, by constituency, emergence 3-5. curve brightens, about 18,0
2. adjust levels: 25,1,20 , 245. mask the main characters and the details given rise to some
3. stamp on the characters to brighten the edge of the sharpening modified dermabrasion.
4. on the back layer for color balance, the middle notes: -12, -10, -13. high light: +8,0, -19.
5. back layer, into the LAB mode,
6. Create a new layer, Shift + Ctrl + N, soft mode, transparency 30-40%,
7. the application of the image on the new layer, layer: merge layers, soft mode, transparency, 100%,
8. adjustment layer to adjust the curve on the lightness channel, 5,0
9. on the LAB color image saturation, hue adjustment, full size: 0, +10,0. Yellow: 0, +35,0. Green: 0, +15,0. Red: 0, -20,0. Blue: +10, +30,0.
10. into Levels: 20,1.20 , 245. on the lightness channel to adjust the gradient in the mask with a round out at the main characters, and then brush clashes details.
11. stamped, return RGB color, the image is optional color options, red channel: 0,0,0, -30 given rise to the petals on the mask,
12. stamp, the new vacant layer, sprinkling with white brush to increase effects of pen pressure. 100% hardness, spacing, +54%


1. Duplicate the layer, soft light mode, the use of soft layers is optimized for
2.Ctrl + U hue saturation adjustment, with a fodder learn the color of the leaves, change the hue of the season has reached the purpose of transformation, we need the feeling of winter to find the leaves of the hue, the brightness adjustment for the most light.
3. Note lightness tolerance under which the details of the slider, you can select constituencies reduced saturation, hue can also be used to cultivate transparency, here is the color range, closing duplicate the layer, with the background layer to color range.
4. constituencies and returned copy layer selected, emergence, for the selected part of the saturation of 0,
5. snow feeling of the figures in the anti-choice, you can use the color range, you can also use the hue saturation, and eventually add contrast, wiping out some dress.
6. some tiny rigid sleet, superimposed on the snow to be opaque, with the contrast in the copy layer selected, alteration the overlay mode, copy the layer under in contrast,
7. the overall rate of a contrast with outlook about clashes among a massive brush, not including figures, giving details of the snow.


1. Duplicate the layer, adjust brightness, contrast, down the merger,
2. into the LAB mode, select the image of the image, calculated,
3. the layers mode to color, stamp layer,
4. into the RGB channel, filled with black and blue channels to extract the green channel selection, will fill the selection with white,
5. Hue and Saturation, Red: +20, + 1,0. cyan: -7, +26,0. other data does no shake, the layer mode to color,
6. into the RGB channel, select the green channel selection, anti-selection, adjustment layer color balance, choose the middle tone, value: -10, -6, +16. Shadow: +4, +5, -2. high light: -19, -26, -40
7. back layer, into the RGB channel, select the red channel selection, copy, paste it back to RGB mode, layer mode to color, select the curve adjustment layer, the red channel: 173,193. Red channel: 58,56. Green Channel: 180,201. Green Channel: 53,58. Blue Channel: 55,62.
8. The layer mode to color, copy the layer, copy the map layer, the layer mode to brightness, transparency, 20%
9. Select the adjustment layer, hue saturation, blue: +5, -49, -2.
10. adjust the color balance adjustment layer, middle notes: -6,0, +3. Shadow: -7, +3, -1.
11. color balance, shadow: +4, +5 , -2. Shadow: +4, +5, -2. High light: -19, -26, -40.
12. Plus lightning effect.


1. establish Hue Saturation adjustment layer, saturation -49,
2. to establish an optional color layer, red: -49,0, +7, -41. yellow : 0,0,0, -23
3. to establish the Hue / Saturation layer, brightness -49
4. Colors. Yellow: 0,0,0, -26. White: 0,0, +46,0. Intermediate colors: 0,0, -6,0.
5. Optional color. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency down to 37%
6. Stamped, rumpus cutback, sharpening, painting and simple to use tool to repair the knee close The spot,
7. and invisible corners, making a heart-shaped selection, emergence, with the curve provides bright.


1. Copy a layer into smart filter for the purpose of the filter effect can be adjusted
2. Filter - Render - Lighting Effects, all light sources, negate 17, Matte - 25, the plastic effect of 100, underexposure 32, negative 28,
3. New optional color adjustment floor, red: -100, -3,03,0. Yellow: -59, -6, -23, + 1. Green: +9, +5, -100, +27. cyan: +8, -76, -3, -100. White: +1, -40, -73, -10. Intermediate colors: +16, -18, -18, -3. Black: 0,0,0, +28


1. slightly adjust color hurl, adjusting a rough tone, establish Levels adjustment layer Levels full channel: 0,1.35,255. Levels of red channel: 0,0.85,255. Levels Green Channel: 0,1,10,255 Levels: 0,0.95,255
2. To create the Hue / Saturation adjustment layer reduces the saturation of aboriginal, Full Figure saturation -30
3. to create a Photo Filter adjustment layer, the first tread in the blue has bring ... to an end with this tread to deep yellow, the concentration of 25%, mode mode, the original place where the dark darker, choose the Channels palette, clutch down the ctrl points of red channel, get back to photos selection populate the black mask filter.
4. to establish an optional layer of color adjustments, red: 100, -33,100, -40. Yellow: 0,0, -40,0. White: +15,0, +20, +20
5. The windows brighten the more, the establishment of the Hue / Saturation adjustment layer to part in the window and wipe. Hue 260, Saturation 25, Lightness +75
6. To create a color balance adjustment layer, to discriminate the characters and the surrounding environment, the set after the mask used in the large soft black brush to figure as the heart angle rub a bit on it. Levels +20, +20, +40, select midtones
7. Establishing Levels adjustment layer, the first Ministry of dark and light general points out, black and white in the mask using the gradient tool pull from the top right corner to the lower left corner of the black and white gradient,GHD NZ, to the right at present. Full channel 0,0.80,255
8. Add light, use the , the upper left corner a bit dark, so add a mask to wipe out the upper left corner. Points of light, strength: 28, Focus 52, gloss -100, materials 100, 17 exposure, environmental 32
9. Create a new layer back, look at light and dark contrast to enhance the establishment Levels adjustment layer in the mask gradient tool with black and white drawing, from the upper left to lower right corner of the black and white gradient, the upper right corner of the light is completely obscure the part of the mask with a white brush in the brush out, and then figure out from the mask in the brush. Levels all channels. Levels full channel: 0,0.80,255
10. Sharpening, a little dermabrasion, add the word to complete.


1. New gray coating, with a curve to adjust the brightness, 152,124
2. cutout eyes and mouth, to be accentuated,
3. reduce the overall saturation, saturation ° -56
4. superposition to the overall color with the color proclivity,
5. hide the hue and color overlay layers, and open access panel, copy the R channel,
6. Create a new layer paste, and use filters color mode to adjust the transparency of


1. Open the original image, copy the layer, the image - adjust - to color
2. filter - Artistic Effects - Plastic packaging, according to reduce the transparency of the original
3. adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer black and white constituencies, money becomes small eyes, hidden Back to the background layer,
5. to obtain in front of the high-light culling correction curve, dragged the top of the curve, the achieve came out
6. adjust the brightness contrast of the background layer, increase, or an suitable adjustment to the color, brightness +4, contrast +7


1. Open the original image, copy the layer, the image - adjust - to color
2. filter - Artistic Effects - Plastic packaging, according to the original Figure reduce transparency
3. adjust the black class color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer black and white constituencies, money becomes small eyes, conceal the background layer back,
5. to get in front of the high-light selection adjustment curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, increase , or an appropriate adjustment to the color, brightness +4, contrast +7


1. Select the blue channel RGB layer, mixed-mode
2. channel mixer, nail the
3. resurfacing, landscaping figure form.
4. to give people the skin and clothes with parameter default; use after the effect of blue, also need to use the
6. to the effect of step 6 are mixed mode to
8 ..
9. fine-tune the look or facial skin color, brightness, contrast, and some of the details.
10. produced as shown in the
12. to the
13. The


1. Create a new layer, filled with yellow, overlay mode, mathematical 247,240,197
2. Copy just the yellow layer, Linear Burn mode, the mask clashes yellow car, avoid car color than yellow,
3. adjust brightness, contrast, high light part of the normal subject of color and exposure, brightness -20, contrast +64, the new adjustment layer saturation, saturation -31. OK The final sunlight of the daylight, high light color and detail by the subject, the shadows can be ignored,
4. Duplicate the background layer the shadow highlight adjustment, the best place to shadow detail as the base, shadow: the number 100, color width of 33, radius of 102, high light: the number 0, the tone width 50, radius 30, to adjust: +20 color correction, contrast adjustment between 0 and 0.01% of the construction of black, white construction 0.01%
5. Duplicate the background layer to adjust the sky brightness, with layers make up the sky over the lack of exposure,
6. tuning the details, to delete the sky wires, fix, Clone brush will do,
7. Flatten image, fine-tuning the details, sharpness


1. buckle out of character, adjusting photo color, contrast and undue attention to the photo did not make light of the legs in place need to be adjusted
2. adjustment of skin color, clothes color, mainly used to adjust the layer , then add the background material, reflection, etc., pay attention to little feet down the extend deformation is used Free Transform to adjust drip
3. in the legs add a little high light, high light pen situation outline, fill Gaussian white --- Fuzzy --- reduce transparency, you can also fill the new layer 50% gray soft --- --- model draw with the Dodge tool, many roads leading to Rome, can easily reach the destination can
4 . material, the text with a click, the last sharpening can


1. the photo opens, find some form similar to the chateau.
2. will be subtracted from the house and put a new layer. You can use the Polygonal Lasso tool to select housing, and through a relatively soft eraser tool to erase the background.
3. immediately need a new background, from the material library to pick a
4. the sky into the rear of the house (wind layer into the housing layer below), and add a little perspective distortion effects of the sky to increase the depth of the background.
5. scrutinize the brim of the house, there still remain some of the original color of the sky above.
6. with the magic wand select the local housing floor space, and then do Select> Modify> Expand command to inflate the range of options, enter an appropriate value of the selection to comprise the need for color correction house edge. Executive Image> Adjust> Hue / Saturation command to adjust the color of the edge of the roof the same color.
7. proceed to use the Hue / Saturation to modify the housing and the color of the sky to empower them to coordinate likely integration.
8. will have to remove the palm trees next to the house, with the copy stamp tool to copy the house to draw tiles between the part of the ground and first floor.
9. add to a bolt of speedy added to the screen traction. No feathering effect using the brush to draw a bolt of lightning, copied to a new layer, add the flicker effect. Then use the Dodge tool to highlight the roots of lightning clouds.
10. using hand-drawn pictures or around the house to add some dead tree, memorize to adjust the color and brightness.
11. To make the house look more worn, painted on the roof of a aperture.
12. Continue to add the effect of break. Broken beams and aqueduct, to destroy variant roof and glass. To destroy things and then copy the stamp tool to use to fill the place vacated
13. Add some stains. First, the windows, with an random brush to add some variegated glass. Then change the layer blend mode dye glass so that it can be well mixed together. I used this tutorial brightness mode.
14. on the whole house to repeat the same steps, using a little deeper color and blend mode set to overlay mode. Attention to seams and edges, this place is the most prone to stains.
15. portico enlarged detail.

1. into the channel panel, and then use the transparency of 50%
Channel Green - Mixed Multiply, opacity 20%
channel red - mixed dark, opacity 100%
2. adjustments - color balance - high gloss - Levels: -8, +13, +11
3. blue channel during the first petition picture, layers: Background - Mixed: Multiply, Opacity 50%,
4. with curve adjust the brightness, move the top right of the red channel of a little,
full channel 6,0 and blue channels 4,15
5. Copy a layer copy of the out of the blue channel of the operation another, mingled Multiply, opacity 50%
6. Finally to do is highlight the characters, and with the eraser, given rise to some human, disburse consideration to the appropriate lower transparency.


1, this effect can be directly transferred with curves out over the whole channel is about 1 / 4 grid,
-105.125 green channel, blue channel 151.254
2. with lens correction added black border. Add Noise, which vignetting - the number of -28 (dark), the focus +5,
3. with the brush tool on the Internet under a pen scratch about in the above picture and then merge the layers
4. Add Noise, amount -2.45
5. to do a side


1. Duplicate the layer mixture mode to Screen,
2. Coating 2 Mask Reverse given rise to the eye
3. back (alt + ctrl + shift + E)
4. channel mixtures,GHD Hair Straightener, select the color, red +54, Green +54, Blue +32
6. Mixed mode - are stacked
7. on the back layer to adjust the image - adjustments - Shadow / Highlight - Shadow: 50,50,144
high light: 0,50,30
the middle of the transfer: 20.0
0.01,0.01
8. again back
9. wipe away the right cheek with the stamp of the sun
10. with the Dodge tool - the range of high light intensity of 50%, given rise to the eye reflection, just rub the eye black,
11. again stamped Filter - Other - High contrast, parameter 80
12. to change the high contrast that layer Mode to Soft Light,GHD Green Butterfly 2011, enhance contrast,
13. use your preference The usage of sharpening
14. for a long period less saturated red hue, or other fine-tuning to try

1. Duplicate the layer, the overall provides bright, curved top right,
2. with a constituency hook tool nose circle, and then brightens with curves to highlight the nose and nails
3. color balance - high luster - Levels: +8,0, -22
midtones - Levels: -10, + 29, +27
Shadow - Levels: -2, -3, +14
4, Optional Color - Red: 0, +1, +23, -29
Available colors - Yellow: 0,0, +4, +28
5. adjust the affected skin color, slightly darker color press
6. with a curve to highlight the texture of the dark tank pressure, is a black mask, with masks with adjustments to modify the general good that
7. brighten the overall color, top right of the curve,
8. Finally, the lips of the revision,
9. add text



1. use the
2. using ctrl + I RP operation:
3. Levels using ctrl + L to adjust values ​​for [145,1.5,160]
4. transferred into the general layer, after a new blank layer and fill it with black on the bottom.
5. using ctrl + T to free transform, the use of perspective.
6. duplicate this layer, and use the free transform the perpendicular flip.
7. align the two layers, and connect attach.
8. use the Free Transform to adjust the zoom feature of altitude.
9. use of color filter


have to remember that 20 category of PS technology! ! ! The United States will not do your photos! ! !

a simple digital photo retouching
1 open late pictures, like the implementation of color / saturation (-40) to reduce saturation.
2 new layer, the layer mode to soft light, with the brush tool will need to polish the part of the painting several times, where you can easily extract the color palette used
3 pictures soft color conversion is insufficient, then about the implementation of the emulating Gaussian blur filter (+85)
simple with photos came to light less than
1 Open the image, copy the background layer, change the background color filter layer pattern
2 color of the background layer order to adjust

30 秒 get Plmm aesthetic photos
1 Open the picture, copy the background layer double
2 for reproducing the background layer a Gaussian Blur (radius of 4 to 6) will copy the background Second, the prototype layer to light
3 new layer, add filling pattern (half pre-defined gray well and half white curtate stripe pattern), set the blending mode to Multiply

Open the image displacement effect
1 picture, a new layer, select the View - the potentate, select the move tool, respectively, from the top and bottom drag out the two blue markings (9 compartment)
2 rectangular selection using tool, fill the box (dark gray 1,9, 5,7 black, 3 light gray) to psd format, and then near the file
3 to Filter - distort - the replacement, select the retention psd file
Note (value = 255) is the largest assured displacement, that is the corresponding image pixel to the right and down; gray (color value = 128) did not generate displacement)

shading effects
1 photo Open the image, Select - Select All, then Edit - Copy, establish a new channel, Edit - Paste to paste the copied images into the new channel]
2 implementation of the image - adjustment - Anti-like, back to RGB channels edit - remove, delete the original image
3 to Select - Load Selection, cry the new channel, Executive Editor - fill (the color)

atomization
1 Open the picture, the new map Layer one, set the foreground / background color (black / white), to Filter - Render - Clouds, will add a layer mask layer
2 Repeat the filter - render - clouds, image - adjust - brightness / Contrast (80,0, a mode to color filter layer)
character illustration effect
1 Open the image, copy the background layer, the implementation of the image - adjustment - Channel Mixer (Gray, +30, +60 , +10, monochrome), the implementation of the filter - stylize - find edges, remove the noise
2 Levels of miscellaneous mode to Add a Levels adjustment layer layer, adjust the output levels (0, +155) the implementation of form, color image communist
4 - adjustment - optional color, fine-tuning of color (red, 0, +100, + 100, -75; yellow, 0, -40, +100,GHD MK4 Gold Straighteners, -40)

antique photos using the color overlay to add light and color effects
1 Open the image, copy the background layer, the implementation of the image - adjustments - to color, adjust brightness / contrast (-42, +18)
2 Add Merge Visible and then add the filter
3 - lens flare (brightness +100)
4 Duplicate the background layer, added again, yellow)

to add photos blue sky
1 Open the picture and copy of a Select the > 2. on the replication layer uses Gaussian blur filter (+4.0).
3. do color adjustments (+50,0, -64)
4. with a blurred edge eraser erase requires remove section.
5. the proper use layer blending modes.

establish hazy in bright (landscape, ecological class)
1 Open the image, copy the layer.
2 copies layer The layer mode to br> 5 add some sharpening, reducing transparency.

a photo to add a glass effect
1 selected zone, press Ctrl + J
2 Gaussian blur on the mow layer (+ 3.1 pixels).
3 to adjust color balance (-39, +29, +16).
4 new layer. Choose the thickness of the cup area add a custom gradient filling (black and white gray, the array is dark, glossy, dark, high light), press Ctrl + T on the constituency to adjust the thickness of the glass.
5 filter - distort - Glass , select your favorite pattern (distortion, smoothness of 1, zoom 50%).

burning paper effect of the old photos - PS treatment $
1 pure open a picture, the implementation of the image - adjustments - Hue / Saturation (+1, -58, +1).
2 image - adjustment - change (mid-tones, deeper yellow, deeper red highlights).
3 Duplicate the background layer, the implementation of filter Mirror - texture - particles (9,56, vertical).
4 new layer, to Filter - Render - Clouds.
5 and run the image - adjust - brightness / contrast (+27, +100 ).
6 with the Magic Wand, select one layer of black constituency.
7 off layer of a preview, press Copy the background layer, the foreground color to dark brown.
8 Select - Modify - Expand (5 pixels), select - Feather (5 pixels)
9 Edit - Fill (foreground), the selected layer an, with the sorcery rod select the black constituency
10 off the background layer and A preview of the layer, copy the background layer selected, Executive Editor - Clear.
11 images - the canvas size, height / width of one centimeter was increased, positioning (in).
12 opened the background layer Preview , select the background layer and fill the foreground color (light brown).
13 Duplicate the background layer selected, do Layer - Layer Style - projection. (positive end laminations, 45% opacity, angle 45, from 7 expand 2%, size 10).
14 merge all layers.

piebald effect of the other craft frame a new system of law
1 file by D key fill the background is white
2 Then, filters --- --- smokes rendering.
3 CTRL + M to adjust under the curve (high contrast black and white).
4 After completion of the effect of further next filter - distort - Glass (Distortion 7, 3, smoothness, texture - sheet, zoom 50%).
6 Create a new layer, the background is black, the other a new layer, add sufficient white rectangle.
7 layers in the implementation of the rectangle where the filter - twist - replacement, select the default discretion. Then find the newly saved PSD file can be replaced.

PS rendering the atmosphere of your photos (landscape)
1 Image - Adjust - Levels (RGB +29,1.0, +234). Form Color tenet l2wvg.V 'T @ 4I
2 Executive Hue / Saturation command (full size -14, +41, -1).
3 continue to Hue / Saturation (red, hue values ​​decrease, saturation degree increase).
4 continue to Hue / Saturation (yellow, -22, +45, -1). www.swcool.commDZ-u
5 continue to Hue / Saturation (green, +15, 0,0).
6 adjust the brightness / contrast (brightness decrease / increase contrast). Xingse doctrine (H {T2P4ccN
simple sketch effect
1 simple open picture, do to the color, adjust brightness / contrast (brightness lessen / increase contrast).
2 Duplicate the background layer (Ctrl + J), select the background layer, the implementation of the filter - the neatness - find the edge, then the UXXXXX sharpening, and then layer patterns
to Overlay.
3 new layer, fill the white, add noise, then the film blur, the layer mode to Multiply.
4 rubber tools (opacity to 15%) , wipe some of the high light.

strokes drawn sketch effects
1 Open an image, copy the background layer, select Layer 1 copy to Filter - Blur - Gaussian blur (2.0 pixel)
2 copy background layer again, select Duplicate Layer 2, the implementation of the filter - sketch - watercolor pen (20,60,80), the layer blending mode to darken.
3 Duplicate the background again Layer, Duplicate Layer 3 selected, the foreground color to red, to Filter - Sketch - Sticky Notes (25,7,10), opacity set to 30%.
4 Duplicate the background layer again, Copy the selected layer 4, the foreground color set to black, foreground / background color set to black / white, and the implementation of the filter - sketch - copy (1,50), the Executive Levels adjustment (RGB,GHD IV Black Straighteners, 157, .0,159) , the fill value 30%.

uncomplicated path to do special photos
1 Open an image.
2 selected the blue channel in the channel, and then in the blue channel to Filter - Style of - overexposed, you tin point behind to the RGB channel.

Matrix effects
1. Create a size of 500X300, RGB mode, the white background periodical.
2. with a free text input tools Enter a channeling 01 code, and press CTRL + T to put it over the vertical circulation and pull into a multi-copy number ranging from small, haphazard place a few. Another method is to use filters, you can achieve very good results. is the menu - Filter - Texture - particles, the intensity and contrast are adjusted to 100, particle type selection vertically on it.
3. to those 01 code all the txt layer and incorporate the background layer, and the foreground color R: 100, G: 255, B: 0 just about green, the background color set to black.
4 Select Menu - Filter - neon light effect, luminous size set to 10, brightness 15 .
5. Select Menu - Filter - Stylize - light edge, the edge width is set to 1, the brightness set to 20, about the smoothness set to 1.
6. Select the menu - Image - adjust - brightness / contrast, the brightness to -10, the contrast adjusted to about 60
Ps . is to use the washing process to rinse negative slides, it would obtain more quirky and interesting colors. If the MM portrait photograph, will make even filled with a decadent decadent avant-garde colors.
1 Open image, and let the right shows Multiply Multiply br> 5 in the control panel, select the blue channel channel into the 25,0.75,150 to validation.
6 selection in the green channel access control panel, go to Input Levels Brightness / Contrast shortcut keys