We have to memorize namely 20 kinds of PS technolo

! ! Let not your beautiful photos ! ! !


Photo name: send up the photo a soft blue and yellow - a uncomplicated course,
1, open the original image matter, reception Ctrl + J to copy the background layer to layer, point channel panel, select the blue channel, image> apply image, layer as the background, merged to Multiply, Opacity 50%, RP tick,
2, back to the Layers panel, create a curves adjustment layer, and blue channels: 44,182, red channel: 89,108
3, create a new layer, fill it with black layer blending mode to Multiply, Opacity to 60%, choose the Elliptical Marquee tool constituency middle section, press Ctrl + Alt + D Feather with a value of 70, and then double-click the Delete key to delete, then activity on words to complete the final effect.


Photo name: bring up the photo a beauteous red and yellow,
1, open the original image material, Ctrl + J to copy the background layer to layer, press Ctrl + Shift + U to color, run: filter Mirrors> Blur> Gaussian Blur, number 4, layer blending mode to Screen, the layer opacity to 27%.
2, create a new layer, press Ctrl + Alt + Shift + E back layer, layer blending mode to color. 3, create a gradient map adjustment layer, lavender - orange, Alt + Ctrl + G with a clipping mask.
4, create a brightness / contrast adjustment layer, -5, -21
5, create a Smart Sharpen adjustment layer, set to the default value, number 46, radius 0.8, Gaussian blur,
6 create a Levels adjustment layer, 8,1.00,255
7, build one optional color adjustment layer, Red: +17, -8, +16,0, yellow: -54,0, +10, + 18, White: -5,0,0,0,


Photo name: bring up the nostalgic landscape photographs,
1, open the original image, copy the layer
2, curve adjustment, the value RGB: 109,99
3, hue saturation, value: 0, -39,0
4, color balance , values: 0,0, -34
5, optional colors, independent colors: 0,0, -20,0
6, a new layer, fill d7b26c, layer mode overlay, opacity 56 %,
7, the clouds pull material into the figure, the top into the artwork, soft light layer mode, the outside part of the sky in addition to wipe out, back layer (Ctrl + Alt + Shift + E)
8, optional color, black: 0,0, -14, -5
9, a new layer, fill 0d1d50, layer mode exclusion, to copy a layer, filling 52%
10, curve adjust the value RGB: 128,155
11, color balance, value: +24, +7, -64, filling 70%
12,Lacoste Tourelle Shoes, Levels, value: 29,1.00,227, filling 58%
13, an optional color, neutral colors: +16, +12, -11, +5
14, back layer (Ctrl + Alt + Shift + E), color balance, value: +24, +7, -64, filling 38%
15, back layer (Ctrl + Alt + Shift + E), opacity 46%, filling 48%,
16, Ctrl + E Merge Visible, Sharpen about


Photo Name: young folk deal with the slight rind out,
1. Duplicate the background layer. Filter - Blur - Gaussian Blur, Radius 10.
2. set the layer blending mode to Double-click the layer label to open the right mixture of options. In the progressive mongrel, cancel progressive R and G channels,
3. The use of color balance the image of the curve, according to the picture to determine
4. A new layer, select the mend Brush (J), select level sampling. Of large freckles or blemishes, sham removed.
5.ctrl + shift + alt + E, stamp all the layers, the skin part of the tick, you can choose their own way, I personally prefer the pen tool, yet you can also use the polygonal lasso tool to Note that to deal with the skin, so to remove the eyes, eyebrows, lips, nostrils. Anti-selection (ctrl + shift + i) Remove more or less the skin, excess parts.
6. Filter - Blur - Gaussian Blur with a radius of 20. Set layer opacity to 75%
7.CTRL + J, duplicate the layer 3 filter - Other - High Pass, a radius of 4, mixed mode to >

Photo Name:
1. open the original image, the most contrast of the blue channel copy,
2. and further increase the contrast with Levels, the purpose is to just let the stone there are many levels
3. the adjustment of a good blue Copy to copy the layer inside the channel and you want to add color, I used the deep orange
4. to copy the red channel to the pedestal map layers, using masks to remove the sky and stone, leaving only grass and to add color with the Gradient Map
5. open the material lightning ball, copy the red channel contrast to just the largest file
6. Select the layer blend mode to Overlay and adjust the location and size, making it a light source, remove some more stuff (to judge), then use the radial blur filter to deal about radiation, allowed the formation of emitted light beam
7. to copy the base map of the channel inside the red channel to enhance the contrast, so grass high light revealed more clearly, and then select Paste to a layer of high optical parts inside, filled with white, the layer mode to overlay, then use the mask to remove the white part of the sky, leaving only part of the grass, the grass appears to be bright light of the light sense
8. Select Layer 1 and then invert the mask, get the sky constituency, addition curves and hue / saturation adjustment layer and adjust their personal favorites like color and purity
9 Finally add some posters units, so ######## posters that look real, the use of color, I attempt to choose a stone and gold to the color of sand, so the color has been reverberated among


Photo Name: sea beach,
1. open the original image, the new layer (Ctrl + Shift + Alt + N), then stamp the visible layers (Ctrl + Alt + Shift + E),
2. into the channel, copy contrast to relatively mighty the green channel, and then amplify the contrast, white white, black, black, or with a brush (overlay mode) Ctrl + Green channel copy, extract constituency
3. the sky material lag in, the establishment of the mask, rub the figure
4. establish layer, soft mode, make the sky look better,
5. to do the water reflection, Ctrl + T vertical flip, the establishment of the mask, with a brush to draw their lusted effect , Multiply mode effect better, for figure varies,
6. color, accommodate according to private habits, agreeable with the optional color,
7.Shift + Ctrl + Alt + E, stamp shown in Figure layer, layer mode Multiply, and then mask the darker corners of pressure, chiefly for the water pressure dark, so the shade more balanced,
8. Filter - Noise - Add Noise, number 3, Gaussian delivery, color, make the characters and the same grainy sky,
9, the final fill the sky material


Photo Name: PS in corner hand-drawn pictures,
1. open the original file, according to their own feelings through color adjustment to adjust the film, and then resurfacing, dermabrasion value not also many, (Neat image plugin)
2. a new layer, color FEE7D6, (according to the movie character's skin color to set ), the layer mode to Overlay and 25%, 20% with a brush the skin on the face and neck light wrapping,
3. features of the detailed work, cutting out the mouth, the emergence copy (Ctrl + J), with Smudge tool to smear on the lip, the lip skin becomes soft and delicate (not too much strength)
4. Create a new layer to the lips and face color, color FDC1D6, the layer mode to color, with a brush in the side of the lips and face painting,
5. with the Dodge tool, the range is the high light exposure of 25% to draw the lip of the high light, with the Burn tool, the middle range, exposure 20% enhance lips contrast,
6. a new layer, color 8E1A25, brush pixel is 3, draw the inside of the inside, then draw 2 pixels outside the lip lines (some lines to construct high-light mask Dodge some)
7. circle the emergence of the nose, copy, use the smudge tool around the gentle elegance of the nose, then use the Dodge tool range is a high light exposure of 20%, to strengthen the high-light the next part of the nose, then color 422B2D, 2 pixel brush to draw the nose contour (lines light up with a better tool if to make up for the next)
8. eclosion circle replication of the eye brows with the smudge tool on the soft skin around the eyes, thinning eyebrows, and then use the Dodge tool range is a high light exposure of 15%, to strengthen the high light under the eyes, with better tools the middle range, to deepen the lines around the eyes,
9. with the smudge tool to tarnish some of the detailed eyes, look softer, with some better tools to enhance black eyes, with the Dodge tool range is a high light exposure fewest 20% of high light to enhance eyes and make the eyes look brighter,
10. color 080101, 3-pixel brush, draw eyelashes part (the line Dodge tools to deepen the color depth can be used to make up) eyelash line can also be used paths and some other methods tick,
11. with the smudge tool to apply the prettier eyebrow, brow a little rough specks slightly darker color, apply reduced down along the back, then 2 pixels with a brush in front to draw eyebrows eyebrows lines, so eyebrows extra structured,
12. Smudge tool to choose the hair brush, (according to hair texture to set brush shape), applied the process to be applied along the hair texture, not too much compel, to be applied uniform,
13. cilia brush coated with a normal part to convergence, (hair must be applied carefully)
14. draw the hair texture, the new layer, layer mode to Overlay, choose a pencil to 1 pixel, (picture size to the value decisive according to figures), along the hair color is DFDFDF draw flat texture lines
15. horsetail some prefer the brush tool, brush easily with a fork along the texture of some of the painting, the color layer prototype on,
16. Create a new layer, the normal mode, select the brush tool, pixel 1, opacity 60%, 80% flow, the color is white, draw dynamic forehead hair,
17. clothes and pendants with the smudge tool applied in some softer, and then choose to use the Dodge tool, the range is the high light , exposure 20%, clothes and necklaces to enhance the high light
18. synthesis of the whole image sharpening, sharpening value is 8, with the Dodge tool to highlight some of the little processing, the overall color correction, the ( can be modified to add some background light, highlighting the theme)


Photo Name: post-look Raiders,
1. open the file, copy a layer copy of the
2. Select the duplicate layer of free transform to change the shortcut key ctrl + t to make the characters more slim face fashion
3. by Merge Layers (ctrl + e),Lacoste Canada, the use of cutting tools to upload images from a new makeup, cut off the extra part,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. yellow - 40, -20, -30, -80, white -0,0,0, -50. halftones -0, -5, -5, -5
5. according to curve (ctrl + m) adjust overall color, RGB full-channel - output 214, input 174 and blue channel - output 131, input 124,
6. Image - Adjustments - Color Balance (ctrl + b), the shadow -10,0, +15. High light - 10,0, +2.
7. Around the mouth with a seal tool to cover the skin evenly,
8. With a pen to circle dark bags under the eyes and face, the emergence 60, curves to brighten the constituency Dodge reduce bags under the eyes and facial muscles are not relaxed expression,
9. continued emergence constituency 60, curve brighter, so that the face full, the output 146, input 113.
10. circle to highlight some of out, pluming 60
11. curve brighter, so that the face full, the output 138, input 118.
12. eyebrows, the eyebrows and top of the circle with the skin with a lasso tool, the emergence 5, copy a layer, the Duplicate the layer and move down in mandate to attain eyebrow shaping effect, stamp eyebrows, this must be quite careful
13. began to adjust your eyes, choose the part of the eye ring out, copy the layer
14. pen circle to do eye shadow district, copy a layer, the curve of pressure dark color to adjust,
15. then uniform color eye shadow, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,
16. The details of color adjustment, the upper eyelid 1 / 3 part, Hue Saturation: 0, -40,0
17. Circle the details of the upper eyelid eyelash basis Department, under the eye ahead eyelid 1 / 3, press the DELETE key to delete the selection, the exposed high-light situation,
18. remove the extra part of eye shadow, feather 40
19. circle detail on the inside corner to the eyelid 1 / 2, press the DELETE opener to delete the selection, so that exposed Highlight
20. circle the eyes out, copy the layer, emergence 1, part of desaturation whites, mottled back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to increase the light,
22. eyes shine intonation forgery curve later layer, brush pen on the back half of the left eye, showing some shadows,
23. remove the pupil part
24. with a curve to adjust eye color, so that the same
25. plus eyes high light
26. surround the lip,Lacoste Shua Lace Shoes, emergence 2, high-gloss lip curve adjustments to adjust the lips color
27. adjust the nose Liang Gaoguang, adjust eclipse highlight
28. with optional color palette as a whole, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light): 0,2, -2.
30. liquefaction along the hair pull, combined with lens flare, light 182,35 mm focus,
31. plus, where appropriate, final flash brush complete


1. sketched with a pen in the back of a wing shape,
2. in the new working catalogue into the path 1, double-click the go path.
3. the path into a selection (Alt + Enter), copy the layer,Lacoste Prep CB Shoes, Feather 3 pixels,
4. filled with white, select the suitable intensity of use of the spot tool, the appropriate corner of the painting.
5. Duplicate the layer and fill different colors, combined with distinctions between layers 1 can regulate the transparency of the Oh layer properties,
6. in consensus with the previous usage of product of the second wing, adjust the transparency of the right can black and white gradient adjustment layer and disguise adjustment,
7. Create a new layer draw a round selection, using the brush circle in the constituency, adjust the appropriate degree of transparency,
8. Duplicate the background layer glue into the new Alpha channel, in adding to other places outside the top left turn filled with black, using Filter - Blur - Radial Blur: digit 90, blur method: zoom,
9. select Alpha channel (the channel on prop Ctrl), in Fig. floor area a new layer, fill light yellow,
10. with a pen to generate the beam route, the path into a selection, yellow and white gradient fill color,
11. adaptive transparency, light rub with the eraser at the bottom, is light becomes natural,
12. people who sketch with a pen in the light path, the path into a selection, the edges of strokes with a painting, adjusting transparency, combined with the eraser and smudge tool will achieve better results and spend Several halo effect will be even better -
-

1. to find a fold of the background, will need to produce photo drag the background layer, resize and harvesting, border and background to the match,
2. adjustments - hue saturation, the whole map: saturation -35 degrees, brightness +10,
3. adjustment layers into a soft mode, the effect of the old photos out,
4. hue saturation, the whole map: 0, -80,0
5 Duplicate the layer, hue saturation - color: 340,24,0
6. create a new layer on top, fill it with black,
7. Filter - Noise - Add Noise, increase in the old sense, the number of 25%, Gaussian,
8. Blending Mode to Multiply,
9. Image - Adjustments - RP,
10. to remove the border of variegated, Select the rectangle tool to select the inside edge of the border, DEL key to delete the silhouette part of the variegated,
11. eraser tool clashes with people around the variegated -
-

1. Duplicate the layer and into the channel, copy the red channel, a copy of the red channel curve adjustment, input 100, output 3,
2. with a brush or selection tool, the characters and filled with white flowers,
3.Ctrl + click on the red copy to make it into a constituency, remove red copy, return to the Layers panel,
4.Ctrl + C copy, Ctrl + V paste, figures and flowers Cutout complete,
5. method I: New Fill Layer, R = 255, G = 128, B = 173, the layer to color mode,
6. Method Two: saturation coloring, New Hue Saturation adjustment layer, color playing in front of nail, Hue = 345, Saturation = 60, Lightness = 0, the new curves adjustment layer, 237,255; 188,130
7. Method three: the new color balance layer, the middle tone - Levels: +100 , -54, -20 / +100, -35, +43
shadow - Levels: +11, -7, +3. New optional color adjustment layer, red: 0, +21, -23, - 5. Magenta: -100, -45, +32, -1
8. gradient maps use the new Gradient Map 1, Layer to Color -
-

1. open the original image, duplicate the layer, fill pure black, overlay mode.
2. New Hue Saturation layer: saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, gloss 0, the material 69, 0 exposure, the environment 8,
6. seal, and text-decoration -
-

1. Duplicate the layer, Filter - Blur - Radial Blur: number 71, blur method - zoom, quality - good,
2. to establish a template, struck a car, then smear the dynamic cycle clashes ,
3. Levels - optional colors. Plus material, rendering the whole atmosphere, with minor changes Dodge made, the main diameter of 5, the hardness of the smallest -
-

1. in RAW to adjust the brightness, contrast, after adjustment for the arranging the basis,
2. join the sky material, simple transparency, make the sky into the layer,
3. New Adjustment Layer optional colors - medium color: +20, +6, +7, -4, total, a tiny water color uniform,
4. filled with yellow color, opacity 54%, dark blue fill color, opacity 61 %, fill deep purple, opacity 76%,
5. fine-tuning, high light and middle tone selection method and the resulting mask, high-light selection method: measurement - Source 1: Layers incorporate layers, gray channel, the source 2: Layers merge layers, gray channel, Multiply blend, opacity 100%.
6. midtones selection method: Source 1: Merge layers, gray channel, the source 2: Merge layers, gray channel, Multiply blend, opacity 100%.
7.RGB artery to get the mask, with curve adjustment, high light adjustment: Black wire grid on the left in the middle of the penultimate line, blue line to the slit point, midtone adjustment: up to adjust some,
8. reflected light mask, lasso select constituency, emergence, overall brighten,
9. boat debris to reduce saturation, Saturation: -36,
10. sharpening the overall -
-

1. Open to copy the picture layer, Ctrl + Alt + ~, to be selection, emergence 3-5. curve brightens, about 18,0
2. Adjust levels: 25,1,20,245. Mongolia edition of the main characters and details of some clashes
3. stamped on the figures to brighten the edge of the sharpening modified dermabrasion.
4. on the back layer for color balance, midtones: -12, -10, -13 High light: +8,0, -19.
5. back layer, into the LAB mode,
6. Create a new layer, Shift + Ctrl + N, soft mode, transparency 30-40%,
7. in the new layer applied on the image, layer: merge layers, soft mode, transparency, 100%,
8. adjustment layer, the lightness channel curve adjustment, 5,0
9. the image LAB color hue saturation adjustment, full figure: 0, +10,0. Yellow: 0, +35,0 Green: 0, +15,0. Red: 0, -20,0. Blue: +10, +30,0.
10. into Levels: 20,1.20 , 245. adjustment of the lightness channel, a gradient in the mask with a circular out at the cardinal characters, and then brush clashes details.
11. stamped return RGB color, color options available for the image, the red channel: 0,0,0, -30 given rise to the petals on the mask,
12. stamp, the new blank layer, increase watering effect with white brush, pen pressure. 100% hardness, spacing, +54% -
-

1. Duplicate the floor, soft mode, to optimize the use of soft light aboard the wafer
2.Ctrl + U adjust hue saturation, color of the leaves with a straw draw, to change the hue of the season has reached the transformation purpose, we need the feeling of winter, to find the leaves of hue, brightness will be adjusted to the brightest.
3. Note lightness tolerance slider under the details of which can be selected constituencies reduced saturation, hue can also be used to cultivate brightness, color range is used here, close the duplicate the layer with the background layer to the color range.
4. constituencies returned copy layer selected, emergence, for the selected part of the saturation of 0,
5. Snow is sensibility the figures in the anti-choice, you can use the color range, you can also use hue saturation, and eventually add contrast, wipe out some clothing.
6. some of the snow a bit rigid on the snow to be a fuzzy overlay, with the contrast of the copy layer selected, change the overlay mode, in contrast to copy the layer underneath,
7. overall rate of a contrast with given heave to a colossal brush perspective about the relationship, not including diagrams, giving details of the sleet. -
-

1. Duplicate the layer and adjust the brightness, contrast, Merge Down,
2. into LAB mode, select the image using an image, to reckon,
3. the layer mode to color, cover printed layers,
4. into the RGB channel, blue channel will be filled with black, to extract the green channel selection, will fill the selection with white,
5. Hue Saturation, Red: +20, +1,0. cyan: -7, +26,0 Other data without moving the layer mode to color,
6. into the RGB channel, select the green channel selection, anti-choice, color balance adjustment layer, select midtones , values: -10, -6, +16. shadow: +4, +5, -2 High light: -19, -26, -40
7. back layer, into the RGB channel, select the red channel constituency, copy, paste back to RGB mode, layer mode to color, select the adjustment layer curve, the red channel: 173,193. Red channel: 58,56. Green Channel: 180,201. Green Channel: 53,58. Blue channel: 55,62.
8. The layer mode to color, copy the layer, copy the map layer, layer mode to brightness, transparency, 20%
9. Select the adjustment layer, hue saturation, blue: +5, -49, -2.
10. adjust the color balance adjustment layer, the middle tone: -6,0, +3 shadow: -7, +3, -1.
11. color balance, shadow: +4, +5 , -2. Shadow: +4, +5, -2 High light: -19, -26, -40.
12. Plus the lightning effect. -
-

1. establish Hue Saturation adjustment layer, Saturation -49,
2. the establishment of an optional color layer, red: -49,0, +7, -41. Yellow: 0,0,0 , -23
3. the establishment of the Hue / Saturation layer, brightness -49
4. Colors. Yellow: 0,0,0, -26, white: 0,0, +46,0. Intermediate color: 0,0, -6,0.
5. Colors. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency down to 37%
6. Stamped, noise rebate, sharpening, painting and simple to use tool to repair the knee approximate spot,
7. plus hidden corners, making a heart-shaped selection, emergence, with curves to brighten. -
-

1. copy the layer into a Smart Filter, you can filter for the purpose of effect of adjustment
2. filter - render - lighting effects, all light, negate 17, Matte -25, 100 plastic effect, exposure of less than 32, negative 28,
3. New optional color adjustment layer, red: -100, -3,03,0. Yellow: -59, -6, -23, +1 Green: +9 , +5, -100, +27. cyan: +8, -76, -3, -100. White: +1, -40, -73, -10. Halftones: +16, -18, -18, -3. Black: 0,Lacoste Swerve Lace Shoes,0,0, +28 -
-

1. to tweak the color actors, adjusting a rough tone, establish Levels adjustment layer Levels full channel: 0,1.35,255. Levels Red Channel: 0,0.85,255. Levels Green Channel: 0,1,10,255 Levels: 0,0.95,255
2. The establishment of the Hue / Saturation adjustment layer to reduce the original image's saturation, Full Figure saturation -30
3. a Photo Filter adjustment layer, the first step in the blue has all over, this step is to deep yellow with a concentration of 25%, mode mode, the original place where the dark darker, choose the Channels palette, hold down the ctrl-point red channel, get the selection back to the photo mask in the filter filled with black.
4. the establishment of an optional color adjustment layer, red: 100, -33,100, -40. Yellow: 0,0, -40,0. White: +15,0, +20, +20
5. To brighten some of the windows, set up the Hue / Saturation adjustment layer to in other parts of the skylight wipe. Hue 260, Saturation 25, Lightness +75
6. To create a color balance adjustment layer, the characters and the circling environment to differentiate, set in the mask after using large soft black brush to figure as the heart angle wipe it. Levels +20, +20, +40, choose mid-tone
7. establish Levels adjustment layer, 1st dark and bright areas broadly divided out in the mask using the gradient tool to pull the black and white, black and white from the top right to bottom left corner of the gradient, to the right as yet. Full Channel 0,0.80,255
8. Plus light, use the , the upper left corner a bit dark, so add a mask to wipe out the upper left corner. Point of light, strength: 28, Focus 52, -100 gloss, material 100, exposure 17, the environment 32
9. New seal layer to enhance the see light and dark contrast, the establishment of the Levels adjustment layer in the mask in pull the gradient tool with black and white, black and white from top left to base right corner of the gradient, the light is entirely obscure the upper right part of the mask with a white brush in rubbing out, and then figure out from the mask in the brush. Levels all channels. Levels all channels: 0,0.80,255
10. Sharpening, a little dermabrasion, add the word to complete. -
-

1. new gray coat, with a curve to adjust brightness, 152,124
2. cutout eyes and mouth, to be accentuated,
3. reduce the overall saturation, saturation -56
4 colors with color overlay to the whole proclivity,
5. superposition of two layers of hidden hue and color, open the Channels palette, copy the R channel,
6. a new layer paste and adjust the transparency with the color filter pattern -
-

1. open the original image, copy the layer, the image - adjustments - desaturate
2. filter - Artistic Effects - Plastic packaging, according to the original image to reduce transparency
3. adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer of black and pearly constituencies, money becomes small eyes, hidden, behind to the background layer,
5 Put the front to be selected to adjust the high-light curve, the curve pulled the top of the results came out
6. adjust the sunshine contrast of the background layer, increase, or with deserving emphasis on what the color, sunlight +4, contrast +7-
-

1. open the original image, copy the layer, the image - adjustments - desaturate
2. filter - Artistic Effects - Plastic packaging, according to the original image to reduce transparency
3. adjust the black class color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer of black and white constituencies, money becomes small eyes, hidden, back to the background layer,
5 Put the front to be selected to adjust the high-light curve, the curve pulled the top of the results came out
6. adjust the brightness contrast of the background layer, increase, or with due emphasis on what the color, brightness +4, contrast +7-
-

1. Select the blue channel
2. Channel Mixer, check the
3. dermabrasion, body beautification characters.
4. to give people the skin and clothes with parameter default; use after effect is blue, but also use the
6. to effect step 6 mixed-mode to
8 ..
9. fine-tune what the characters face color, brightness, contrast, and some of the details.
10. produced as shown in the
12. to the
13. The -
-

1. create a new layer, fill light yellow, overlay mode, the value 247,240,197
2. copy just the yellow layer, Linear Burn mode, the mask given rise to a yellow car, dodge car color through yellow,
3. adjust brightness, contrast, high light exposure part of the natural color and subject, brightness -20, contrast +64, New Saturation adjustment layer, saturation -31. to decide the terminal brightness of the sunshine to high light at the color and detail dominate in the dark can be ignored,
4. Duplicate the background layer the shadow highlight adjustment to the most shadow detail as a benchmark in place, the shadow: the number 100, color width 33, radius 102, high light: the number of 0, the tone width 50, radius 30, adjustments: color correction, +20, 0 midtone contrast, the construction of black 0.01%, the construction of White 0.01%
5. Duplicate the background layer to adjust brightness of the sky, with the exposed layer to make up the sky over deficiencies,
6.-tuning the details, to wipe the sky wires, repair Clone brush will do,
7. Flatten Image, fine-tuning the details, sharpness -
-

1. deducted figure, adjust the photos, pay attention to color, contrast and over, this picture does not light up the legs in place need to be adjusted
2. adjust skin color, clothing color, mainly used to adjust the layer , then add the background material, reflection, etc., pay attention to little feet down the extend distortion is used Free Transform to adjust drip
3. in the legs add high-gloss, high luster with a pen outline the situation, fill it with white Gaussian --- --- fuzzy decrease transparency, you can likewise fill the new 50% gray layer of soft --- --- model with the Dodge tool to draw, many roads to Rome, you can accessible reach the destination
4 . material, the text with what the final sharpening can -
-
-
-1. the photo to open, to find some form similar to the castle.
2. will be deducted from the house and into a new layer. You can use the Polygon Lasso tool to select housing, and through a relatively soft eraser tool to erase the background.
3. immediately need a new background, from the material library to pick a
4. the sky into the back of the house (house into the sky layer below the layer), and add a little perspective distortion effects of the sky to increase the depth of the background.
5. observe the edge of the house, where there are still some left in the original color of the sky above.
6. with the magic wand select the local housing floor space, then do Select> Modify> Expand bid to expand the range of options, enter an appropriate value of the range of options to embody the need for color correction house edge. Executive Image> Adjust> Hue / Saturation command to adjust the color of the edge of the roof with the same color.
7. continue to use the Hue / Saturation to adjust the housing and the color of the sky, so that they can coordinate to assembly.
8. will have to remove the palm trees next to the house, with the Clone Stamp tool to duplicate the tile to paint out the house and second layer between the parts.
9. add lightning to add traction to the screen. No feathering effect using the brush to draw a lock of lightning, to a new layer, add a flicker effect. Then use the dodge tool highlighting the roots of lightning clouds.
10. using hand-drawn pictures approximately the house or add some die tree, remember to adjust the color and brightness.
11. To make the house look more worn, drawn on the roof of a hole.
12. to continue to add harm effects. Broken beams and aqueduct, the dome and wreck another cup. After the wreck things, to use Clone Stamp tool to fill the area vacated
13. Add some stains. First, the windows, with an irregular brush to add some variegated glass. Then change the layer blending mode stain to match the glass can be a good mix. The tutorial I used brightness patterns.
14. the whole house to repeat the same treads, use a deeper color and layer blending mode set to overlay mode. Attention to seams and edges, this place is the maximum disposed to dyes.
15. porch detail enlarged.

1. into the channel panel, then use the
Channel Green - Mixed Multiply, Opacity 20%
channel red - mixed dark, opacity 100%
2. Adjustments - Color Balance - High Light - Levels: -8, +13, +11
3. blue channel during the period the applying image layer: Background - Mixed: Multiply, Opacity 50%,
4. with curve adjust the brightness, move the top right of the red channel a little bit,
Blue channel all channels 6,0 4,15
5. copy a layer copy of it, again the blue channel of action, mixed Multiply, Opacity 50%
6. the last thing to do is famous figures, and with the eraser, given rise to some people, disburse care to the appropriate lower transparency. -
-

1, this effect can be directly transferred with a curve out over the whole channel is about 1 / 4 grid,
-105.125 green channel, blue channel 151.254
2. with lens improvement to add black boundary. Add Noise , which Vignette - the number of -28 (dark), the converge +5,
3. with brush tool on the Internet under a scratch of pen on it and then merge the layers drawn about
4. add noise, number -2.45
5. to do a side -
-
-
-1. Duplicate the layer mixture mode to Screen,
2. Coated 2 eyes mask reverse clashes
3. stamp (alt + ctrl + shift + E)
4-channel fusions, select the color, red +54, Green +54, Blue +32
6. miscellaneous mode - are stacked
7. adjustment of the stamp layer, Image - Adjustments - Shadow / high light - Shadow: 50,50,144
high light: 0,50,30
middle tone: 20,0
0.01,0.01
8. once again stamped
9. wipe the right audacity with the seal of the sun
10. with the Dodge tool - the range of high light intensity of 50%, struck a reflective eye, just rub the eye black,
11 re-stamped, Filter - Other - High contrast, parameters 80
12. change the layer mode to high-contrast soft, enhance contrast,
13. use your favorite method of sharpening
14 time less saturated hue of red, or other fine-tuning to try

1. Duplicate the layer, brighten the whole, the curve at the top right,
2. with the circle selection tool nose stud, and then curves to brighten, to highlight the nose stud
3. color balance - high-gloss - Levels: +8,0, -22
middle tone - Levels: -10, +29, +27
shadow - Levels: -2, -3, +14
4, can be choose a color - Red: 0, +1, +23, -29
Color - Yellow: 0,0, +4, +28
5. adjust the affected skin color, slightly darker color press
6. with a curve to highlight the texture of the fish tank pressure dark, black is the mask, the mask with an adjustment with a good general improve one o'clock
7. brighten the overall color of the upper right curve,
8. Finally is a revision of the lips,
9. add text -
-
-
-
1. use the
2. use the ctrl + I RP operation:
3. Levels using ctrl + L to adjust the value of [145,1.5,160]
4. turn into a general layer, after a new blank layer and fill it with black on the bottom.
5. using ctrl + T to free transform, the use of perspective.
6. replica this layer and use the free alter the vertical flip.
7. align the two layers, and join attach.
8. Use Free Transform to adjust the zoom function of height.
9. using color filter


must remember that 20 varieties of PS technology! ! ! Let not your beautiful photos! ! !

a simple digital photo mending
1 open late pictures, favor the implementation of color / saturation (-40) to reduce saturation.
2 new layer, the layer mode to soft light, with the brush tool will need to polish the part of the painting a few, here you can use to assist the extraction of color palette images
3 soft color conversion is not enough, then retinue the implementation of what the Gaussian blur filter (+85)


simple processing photos came to light less than
1 Open the image, copy the background layer, change the background color filter layer pattern
2 Levels of the background layer to adjust

30 秒 obtain Plmm art photo
1 Open the image, copy the background layer double
2 replication layer a Gaussian background blur (radius of 4 to 6) Duplicate the background layer 2 in the model to light
3 new layer, add filling pattern (arrange in advance and define the half gray half white curtate stripe pattern), set mixed mode to Multiply

image dislocation effects
1 Open the picture, a new layer, select the View - Rulers, select the move tool, tow the top and bottom, respectively, from the two blue signal (9 segments)
2 use the rectangle selection tool, fill the carton (dingy gray 1,9, 5,7 black, 3 light gray) to psd format, then close the document
3 perform filter - distort - replacement, select the save psd file
Notes (corresponding image pixel to the left and shake up; dark (color value = 255) namely the largest assured displacement, namely namely the corresponding picture pixel to the right and down; gray (color value = 128) does not produce displacement )

shading effects
1 Open the photo picture, do Select - Select All, then Edit - Copy, to build a new channel, edit - paste the copied image pasted into a new channel ]
2 implementation of the image - adjustment - Anti-like, back to the RGB channel, amend - remove, delete the original image
3 implementation options - Load Selection, cries the new channel, Executive Editor - fill (the color )

atomization
1 Open the picture, a new layer, set foreground / background color (black / white), go to Filter - Render - Clouds, add a layer to layer Mask
2 Repeat filter - render - clouds, image - adjust - brightness / contrast (80,0, a mode to color filter layer)

character illustrator effects
1 Open the image, copy the background layer, the implementation of the image - adjustment - Channel Mixer (Gray, +30, +60, +10, monochrome), work to Filter - Stylize - Find edge, remove the noise with
2 Levels of mixed mode to , +155) form, color ism
4 implementation of the image - adjustment - optional color, fine-tuning of color (red, 0, +100, +100, -75; yellow, 0, -40, +100, - 40)

old photos using color overlay to add light and color effects
1 Open the image, copy the background layer, the implementation of the image - adjust - to color, adjust brightness / contrast (-42, +18 )
2 add Halo (brightness +100)
4 Duplicate the background layer, join it repeatedly,
1 Open the picture and copy a Copy one of the layers in the mouse, the sky turned blue

chose art photo processing hazy
1. an incipient copy layer (Ctrl + J).
2. Gaussian blur on the copied layer Filter (+4.0).
3. do color adjustments (+50,0, -64)
4. erase with a soft-edge eraser explicit absence because some.
5. the appropriate use of Figure layer blending mode.

create hazy in bright (scenery, ecological type)
1 to open image, duplicate the layer.
2 will copy the layer layer mode to reducing transparency.

to the photo with a glass effect
1 selected space, press Ctrl + J
2 on the shear layer Gaussian blur (+3.1 pixels).
3 to adjust color balance (-39, +29, +16).
4 new layer. Select the gradient region thickness of the glass custom filler (black and white gray, the order is dark, glossy, dark, high light), press Ctrl + T on the thickness of the glass selection to adjust.
5 filter - distort - Glass Select your favorite pattern (perversion, smoothness of 1, zoom 50%).

burning periodical achieve of antique photos - PS treatment $
1 pure open a picture, perform image - Adjust - Hue / Saturation (+1, -58, +1).
2 Image - Adjustment - change (mid-tones, deepen yellow, deeper red highlights).
3 Duplicate the background layer, to Filter - Texture - particles (9,56, perpendicular).
4 new layer, go to Filter - Render - Clouds.
5 and then perform image - adjust - brightness / contrast (+27, +100).
6 with the Magic Wand, select one layer of black constituency.
7 off layer of a preview, click to copy the background layer, the foreground color to dark brown.
8 to execute the selection - modify - distend (5 pixels), select - Feather (5 pixels)
9 Edit - Fill (foreground), the selected layer one, with the magic wand selection
10 off select black background layers and layers of a preview, select Duplicate the background layer, Executive Editor - Clear.
11 image - sheet size, altitude / width was increased 1 centimeter positioning (in).
12 opened the background layer preview, select the background layer, fill foreground color (light brown).
13 Duplicate the background layer selected, do Layer - Layer Style - projection (positive end laminations, 45% opacity, angle 45, from 7 to expand 2%, size 10).
14 merge all layers.

Art mottled effect
1 border to another method for production a new file press D to fill the background White
2 then filters --- --- rendering smokes.
3 CTRL + M to adjust under the curve (black and white high contrast).
4 After achievement of the effect and then emulated at filter - distort - Glass (7 Distortion, 3 smoothness, texture - canvas, zoom 50%).
6 Create a new layer, the background is black, another new layer, add sufficient white rectangle.
7 where the rectangle layer on the implementation of the filter - twist - replacement, select the default alternative. Then ascertain the newly saved PSD file replacement you can.

PS rendering the atmosphere of your photos (landscape)
1 Image - Adjustment - Levels (RGB +29,1.0, +234) . Xingse tenet l2wvg.V 'T @ 4I
2 to Hue / Saturation command (full map -14, +41, -1).
3 persist to Hue / Saturation (ruddy, hue values ​​decrease , saturation increase).
4 continue to Hue / Saturation (yellow, -22, +45, -1). www.swcool.commDZ-u
5 continue to Hue / Saturation (green + 15,0,0).
6 adjust the brightness / contrast (brightness decrease / increase contrast). Xingse doctrine (H {T2P4ccN

simple and cozy sketch effect
1 Open the image, perform to the color, brightness / contrast (brightness decrease / increase contrast).
2 Duplicate the background layer (Ctrl + J), select the background layer, the implementation Filter - Stylize - Find Edges, then UXXXXX sharpening, then
layer mode to Overlay.
3 new layer, fill it with white, add noise, then motion blur, the layer mode to Multiply.
4 rubber tools (opacity to 15%), the high light wipe.

strokes drawn sketch effects
1 to open a picture, Duplicate the background layer, select Duplicate Layer 1 to Filter - Blur - Gaussian blur (2.0 pixel)
2 Duplicate the background layer again, select Duplicate Layer 2, the implementation of the filter - sketch - watercolor pen ( 20,60,80), the layer blend mode to darken.
3 Duplicate the background layer again, select Duplicate Layer 3, the foreground color set to red, to Filter - Sketch - Memo ( 25,7,10), opacity to 30%.
4 Duplicate the background layer again, select Duplicate Layer 4, the foreground color set to black, foreground / background color to black / white, implementation Filter - Sketch - copying (1,50), the Executive Levels adjustment (RGB, 157, .0,159), filled with the value of 30%.

simple way to do a special photo
1 Open a picture.
2 channel selected in the blue channel, and then in the blue channel to Filter - Stylize - overexposed, you can point back to the RGB channel.

Matrix effects
1. create a new size of 500X300, RGB mode, the white background paper.
2. with a text input tool for channeling 01 are free to enter a code, press CTRL + T to turn it vertically over the place, and copy a few more ranging from a drag into a small, randomly placed in several. Another way is to use filters, you can achieve very good results. Is the menu - Filter - Texture - particles, the intensity and contrast are adjusted to 100, particle type selection can be a vertical.
3. Those 01 code txt and background layers are entire combined, and the foreground color Set R: 100, G: 255, B: 0 just about green, background color set to black.
4 Select Menu - Filter - neon light effect, luminous size to 10, brightness to 15.
5 Select Menu - Filter - Stylize - illustrate the edge, the edge width is set to 1, the brightness set to 20, the smoothness is set to 1 all but.
6. Select the menu - Image - Adjust - Brightness / Contrast , the brightness to -10, the contrast adjusted to 60 or so

Ps The rinsing process is used to flush negative slides, it would be more strange and amusing colors. If the MM portrait photograph, will be so filled with a decadent decadent avant-garde and even the color.
1 Open the image and the right to exhibit channel, into the channel, into the channel, into the Select the like panel selected the red channel into the .
8 control panel in the channel all the RGB channel selected,Lacoste Protect Laser Shoes, go to all the RGB channel selected, go to