LinkBack Thread Equipment Exhibit Modes We have configured a wireless network implementing PEAP (WPA & TKIP),
genuine office 2007 serial, Cisco
1200 AP,
microsoft windows 7 ultimate 64 bit, and Windows2003 IAS. 90% of the time this is working
perfectly however,
genuine office 2007, users are getting kicked off the wireless network
and being forced to re-authenticate. The only indication of a problem
is the IAS server logs a authentication failure.
First you see
User xxx was granted access.
Fully-Qualified-User-Name = FQDN PATH
NAS-IP-Address = 10.x.x.x
NAS-Identifier = OURAP
Client-Friendly-Name = OURAP
Client-IP-Address = 10.x.x.x
Calling-Station-Identifier = Client MAC Address
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 1983
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = Wireless Authentication
Authentication-Type = PEAP
EAP-Type = Secured password (EAP-MSCHAP v2)
And the user is connected to the wireless network,
windows 7 starter 32bit, a little while
later
User xxx was denied access.
Fully-Qualified-User-Name = FQDN PATH
NAS-IP-Address = 10.x.x.x
NAS-Identifier = OURAP
Called-Station-Identifier = AP MAC
Calling-Station-Identifier = Client MAC
Client-Friendly-Name = OURAP
Client-IP-Address = 10.x.x.x
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 1988
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = Wireless Authentication
Authentication-Type = EAP
EAP-Type = <undetermined>
Reason-Code = 22
Reason = The client could not be authenticated because the
Extensible Authentication Protocol (EAP) Type cannot be processed by
the server.
Please help,
win 7 pro x64 key, any clues would be much appreciated